3M 510 Safety Walk Anti-Slip Tape 60 ft 36 mil
Black anti-slip tape provides coarse abrasive traction on indoor and outdoor surfaces with rubber adhesive backing
- 36 mil thick tape resists heavy foot traffic
- 60 ft roll covers large areas in one piece
- Coarse 60 grit surface grips in wet conditions
- Rubber adhesive bonds to indoor and outdoor substrates
- 3M Safety Walk 510 rated for high-traffic zones
Safety Walk 510 Anti-Slip Tape
This 3M Safety Walk 510 tape provides a coarse abrasive surface for indoor and outdoor traction. It measures 36 mil thick and comes in a 60 ft roll. The rubber adhesive bonds to clean, dry substrates. The black finish contains no fluorescent or glow-in-the-dark additives.
Suited for ramps, steps and walkways
The tape works where a durable, coarse grit is required on flat or gently curved surfaces. It is not intended for continuous immersion or for areas that need a fine grit texture. Buyers needing a different width, length or adhesive chemistry should consider other products.
Apply to clean, dry surfaces
Installation requires thorough cleaning and firm pressure along the full length to activate the rubber adhesive. Cold or damp substrates can prevent proper bonding. Stretching the tape during application often leads to edge lift and premature failure.
How it compares
Measured against everything we stock in Caulking & Sealing Supplies, at today’s prices. Recalculated every night.
- Price $115.99
- Pricier than about 90% of the 631 comparable items (median $16.99).
Specifications
| Product | |
|---|---|
| Brand name | 3M |
Questions about this item
What surface must I already have clean and dry before applying the 3M 510 tape?
The tape adheres to clean, dry surfaces such as metal, concrete, wood or tile; remove oil, dust and loose paint first so the rubber adhesive bonds properly.
Will the 36 mil thickness create a trip hazard where it meets my existing flooring?
At 36 mil the tape adds a low profile; bevel the edges during installation or use a transition strip if the height difference matters for foot traffic.
How can I verify the 510 tape is gripping correctly after installation?
Press firmly along the full 60 ft length, then walk the surface in wet and dry conditions — consistent traction without lifting edges confirms proper adhesion.
More in Caulking & Sealing Supplies
Similar items
Vibra-TITE 146 High-Strength Threadlocker Red 1L 14600
- Threadlockers
Loctite 680 Retaining Compound 10ml .015 in Gap 1835205
- Sealing Compound
Pliobond PC-425-LV Contact Cement 25 Series Tan 1 gal Can
- Sealing Compound
Vibra-TITE 73250 Flexible Gasket Maker 50 mL Purple
- Filler/Repair Compo…
Vibra-TITE 150 Series Medium-Strength Wicking Grade Threadlocker Green 1L Bottle
- Threadlockers





