Thomas & Betts TY526M Cable Tie 11" 30lb Natural Nylon Stainless Steel Lock 100 Pack
- 100PC 11 in NATL TY…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Vinyl-insulated fork terminal for 18 AWG wire, #6 stud, 1000 V rating, crimp termination with brazed seam and funnel-entry barrel
The 3M MV18-6FLX is a crimp-style fork terminal built for 18 AWG conductors and a #6 stud. Its vinyl insulation provides partial coverage and a red colour code for quick identification. The funnel-entry barrel helps guide the wire into the copper contact during installation. It is suited for panel work and control wiring where a secure, removable connection is required.
The copper contact with a tin finish maintains consistent conductivity at the rated 1,000 V. Maximum operating temperature is 221 Degrees F, so the terminal retains its mechanical grip and electrical integrity under continuous current. The brazed seam prevents the barrel from splitting during repeated thermal cycling. Partial insulation coverage leaves the crimp area visible for inspection after termination.
Termination is limited to a single 18 AWG wire crimped into the funnel-entry barrel. The #6 stud size fixes the mounting hole diameter, so the terminal only fits that specific fastener. Tongue length is 0.43 in, which determines the reach from the stud centre to the fork opening. The product carries CSA and UL listings and meets RoHS requirements, but has no UL 94 flammability rating.
Measured against everything we stock in Wire, Cable & Wiring Supplies, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | 3M |
| Product type | Electrical Connectors |
The vinyl insulation is rated for a maximum operating temperature of 221 Degrees F, so it will handle typical electrical heating in a 1,000 V circuit without degrading.
You need a crimper compatible with funnel-entry barrels and 18 AWG copper wire; the terminal accepts a maximum wire size of 18 AWG and uses a crimp termination style.
The tin finish on the copper contact resists oxidation and provides a low-resistance joint, while the brazed seam ensures mechanical strength when torqued onto a #6 stud.
More in Wire, Cable & Wiring Supplies
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?