We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
An 11.26 inch portable monitor with a slim rectangular IPS panel, narrow bezels

52Pi

52Pi 11.26" Portable Monitor 1920x440 Capacitive Touch

SKU CH-QXCE-G8NY9 MPN 52Pi

An 11.26-inch portable IPS monitor with 1920x440 resolution, 10-point capacitive touch, HDMI input, 350 cd/m² brightness and 178° viewing angles

  • Screen size11.26“
  • Panel typeIPS
  • Pixel response time30 ms
  • Image brightness350 cd/m2
  • Monitor categoryPortable Monitor
  • Touch technologyCapacitive 10-point multi-touch
  • Crisp 1920 x 440 resolution on an 11.26" IPS panel
  • 10-point capacitive multi-touch for precise gesture control
  • 178° wide viewing angles keep colours consistent
  • HDMI input connects Raspberry Pi 5, 4B, 3B+ and 3B
  • 350 cd/m² brightness with 600:1 contrast for clear visuals

11.26" 1920x440 Portable Touch Monitor

The 52Pi 11.26-inch portable monitor delivers a 1920x440 resolution on an IPS panel with 178-degree viewing angles. Capacitive 10-point multi-touch supports precise gesture control. HDMI connectivity allows use with Raspberry Pi 5, 4B, 3B+ and 3B boards as well as other HDMI sources. Brightness reaches 350 cd/m2 with a 600:1 contrast ratio.

Installation and Common Issues

Mounting holes on the rear accept a Raspberry Pi board directly for a compact stack. HDMI carries both video and touch data so only one cable is required for most hosts. The 30ms response time and 60 Hz refresh rate suit desktop and media use but not fast gaming. Touch calibration may be needed on first boot depending on the operating system.

Check Your Setup Before Ordering

Verify that your source device provides a standard HDMI output and can drive a 1920x440 resolution at 60 Hz. Ensure the board or computer supplies enough USB power for the touch controller if a separate USB link is required. Confirm that the 11.26-inch form factor fits your intended enclosure or mounting location. Buyers needing a taller aspect ratio or higher refresh rate should consider other models.

How it compares

Measured against everything we stock in Portable & Touchscreen Monitors, at today’s prices. Recalculated every night.

Price $79.99
Cheaper than about 74% of the 315 comparable items (median $139.99).
Pixel response time 30 ms
Higher than about 95% of the 187 comparable items (median 3 ms).
Image brightness 350 cd/m2
Higher than about 70% of the 203 comparable items (median 300 nits).

Specifications

Product
Brand name52Pi
Model name52Pi 11.26 in Capacitive Touch Screen
Part numberEP-0189
Monitor categoryPortable Monitor
Display
Screen size11.26“
Panel typeIPS
Pixel response time30 ms
Image brightness350 cd/m2
Touch technologyCapacitive 10-point multi-touch
Display formatHD
Viewing angles178° (H) / 178° (V)
Colors displayed16.7 Million
Screen ratio16:9
Contrast600:1
Horizontal scan rate60 Hz
Ports & slots
HDMI portsYes
In the box
3D glasses includedNo

Questions about this item

How do I verify the 11.26" display is operating correctly after connecting it via HDMI?

The panel should show a 1920x440 image at 60 Hz with 350 cd/m² brightness and 178° viewing angles; touch response must register up to 10 simultaneous points across the capacitive surface.

What comes in the box with the EP-0189 monitor and what must I source separately?

The monitor includes an HDMI interface for video and touch data; a separate HDMI cable, a 5 V power supply for the display, and a Raspberry Pi board (5, 4B, 3B+ or 3B) are not included and must be purchased separately.

Which version of the 52Pi portable monitor should I choose for my Raspberry Pi 5 project?

The single 11.26" model with 1920x440 resolution, IPS panel, 10-point capacitive touch and mounting holes for Pi boards is the only version listed; select it when you need that exact screen size and touch capability.

More in Portable & Touchscreen Monitors

Similar items