A-Tech 16GB (2x8GB) DDR3 1600 ECC UDIMM 2Rx8 1.5V 240-Pin Server RAM
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB dual-channel DDR3L 1600 ECC UDIMM kit with 2Rx8 modules at 1.35 V
Capacity 16GB (2 x 8GB)
Speed DDR3L 1600 (PC3L 12800)
This A-Tech kit provides 16GB of DDR3L 1600 ECC UDIMM memory across two 8GB modules. It is built for servers and workstations that require error-correcting unbuffered DIMMs. The dual-rank 2Rx8 organisation suits platforms that populate two channels for bandwidth. Desktop and laptop systems cannot use these modules.
The modules run at 1.35V and are rated for PC3L-12800 at 1600 MHz with CL11 latency. They can also operate at 1.5V where the platform demands standard DDR3 voltage. Systems limited to lower speeds will downclock the kit automatically. Boards that only accept registered or fully buffered DIMMs will not post with this unbuffered design.
Each 240-pin DIMM keys into the slot in one orientation; press until the ejector tabs click. Populate matching channel slots as the system manual directs to enable dual-channel mode. The most common issue is mixing these unbuffered ECC sticks with registered modules, which prevents boot. Another frequent cause of failure is installing the kit in a desktop board that lacks ECC support.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | A-Tech DDR3 Server Memory RAM |
| Model name | A-Tech 8 GB 2Rx8 PC3L-12800E |
| Total capacity | 16 GB (2 × 8 GB) |
| Performance | |
| Rated speed | DDR3L 1600 (PC3L 12800) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL11 |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Memory rank | 2Rx8 |
| Kit configuration | Dual Channel Kit |
| Power | |
| Rated voltage | 1.35 V |
Other versions of this model
The 16GB kit contains two matched 8GB modules tested together for dual-channel operation, which is the simplest way to reach 16GB on a compatible server or workstation.
At 1600 MHz with CL11 timing, the modules provide 12800 MB/s peak bandwidth per stick, giving your system faster data throughput for multi-threaded workloads.
These DDR3L modules run at 1.35V but can also operate at 1.5V, so they fit DDR3L and standard DDR3 slots while reducing power draw in low-voltage platforms.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?