A-Tech 16GB DDR3 1066 ECC RDIMM 4Rx8 server RAM
16 GB DDR3 1066 ECC registered DIMM with 4Rx8 organisation and 1.5 V operation
- Total capacity16 GB
- Rated speedDDR3 1066 (PC3 8500)
- ChipsetMajor Brand Chipset
- CAS latencyCL7
- Rated voltage1.5 V
- Buffer typeRegistered
- 16GB capacity expands server memory for heavier workloads
- DDR3 1066MHz speed matches PC3-8500 system requirements
- ECC registered design corrects errors to protect data integrity
- 4Rx8 organisation with major-brand chips ensures stable operation
- 240-pin DIMM form factor fits compatible IBM-Lenovo 77P8692 slots
Capacity and form factor
This A-Tech module provides 16GB of DDR3 server memory in a 240-pin RDIMM form factor. It operates at 1066MHz with a PC3-8500 rating and a CAS latency of CL7. The stick runs at the standard 1.50V DDR3 voltage and uses a 4Rx8 rank configuration with major-brand chips.
Compatibility fit
The module is built as a direct replacement for the IBM-Lenovo 77P8692 part number and targets servers or workstations that require registered ECC memory. Systems that only accept unbuffered non-ECC DIMMs or that use a different DDR generation will not support this stick. Buyers should verify their platform's qualified-vendor list before ordering.
Decisive specification
Registered ECC operation is the single attribute that determines whether this DIMM will work in a given chassis. If the motherboard demands registered error-correcting modules, this 16GB kit meets that requirement; otherwise the system will not post.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $30.99
- Cheaper than about 90% of the 6,523 comparable items (median $188.99).
- Total capacity 16 GB
- Lower than about 60% of the 6,064 comparable items (median 32 GB).
- Price per GB $1.94 per GB
- Cheaper than about 94% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 16 GB |
| Performance | |
| Rated speed | DDR3 1066 (PC3 8500) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL7 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 4Rx8 |
| Power | |
| Rated voltage | 1.5 V |
Questions about this item
How do I install this 240-pin DDR3 RDIMM, and what step is often missed?
Power down the server, open the chassis, align the notch on the 240-pin DDR3 module with the slot key, press firmly until both retention clips click, then verify the BIOS recognises the full 16 GB at 1066 MHz.
What maintenance or replacement will this ECC RDIMM need over time?
No routine maintenance is required; the module either passes POST and runs indefinitely or it fails, at which point you replace the single 16 GB stick with another DDR3 1066 ECC RDIMM.
What limit appears first when this 4Rx8 module runs under sustained load?
The four-rank organisation increases electrical loading on the memory bus, so the platform’s maximum supported rank-per-channel limit is reached before bandwidth or thermal limits become an issue.
More in ECC Server RAM
Similar items
SK hynix 4GB DDR3 1066 PC3-8500 2Rx4 ECC REG Server Memory HMT151R7BFR4C-H9
- 4 GB
- DDR3 1066
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
SK hynix HMT42GR7AFR4C-RD 16GB DDR3 1866 ECC Registered CL13 1.50V 2Rx4 server RAM
- 16 GB
- DDR3 1866
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
A-Tech 16GB (2x8GB) DDR3L 1600 ECC RDIMM 2Rx4 1.35V Server RAM
- 16 GB (2 × 8 GB)
- DDR3L 1600





