A-Tech 16GB DDR3L 1333MHz ECC RDIMM 4Rx4 1.35V Server Memory
A 16 GB DDR3L 1333 MHz ECC registered DIMM with 4Rx4 organisation and 1.35 V low-voltage operation
- Total capacity16 GB
- Rated speedDDR3L 1333 (PC3L 10600)
- ChipsetSamsung Chipset
- CAS latencyCL9
- Rated voltage1.35 V
- Buffer typeRegistered
- 16 GB DDR3L 1333 MHz module increases server capacity
- ECC RDIMM with 4Rx4 organisation detects and corrects data errors
- Registered signal buffering improves stability in multi-DIMM configurations
- Low-voltage 1.35 V operation reduces power draw and heat
- Tested as compatible replacement for Samsung M393B2K70CM0-YH9
Server Memory Upgrade
This 16GB DDR3L module replaces Samsung M393B2K70CM0-YH9 in servers and workstations. It runs at 1333MHz with CL9 latency and registered ECC for data integrity. The low-voltage design suits systems qualified for 1.35V DDR3L DIMMs.
Thermals and Power Draw
Operating at 1.35V reduces power consumption compared to standard 1.5V DDR3. Registered buffering adds slight electrical load on the memory controller. Passive cooling relies on chassis airflow; no active cooler is included.
Build Quality and Connectors
The 240-pin DIMM uses Samsung chipset components tested to PC3L-10600 specifications. The 4Rx4 organisation increases density but requires a memory controller that supports quad-rank modules. Verify platform qualification before installation.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $28.99
- Cheaper than about 91% of the 6,523 comparable items (median $188.99).
- Total capacity 16 GB
- Lower than about 60% of the 6,064 comparable items (median 32 GB).
- Price per GB $1.81 per GB
- Cheaper than about 94% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | Compatible Replacement for Samsung |
| Model name | M393B2K70CM0-YH9 |
| Total capacity | 16 GB |
| Performance | |
| Rated speed | DDR3L 1333 (PC3L 10600) |
| Processor | |
| Chipset | Samsung Chipset |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 4Rx4 |
| Power | |
| Rated voltage | 1.35 V |
Questions about this item
How do I install this 240-pin DDR3L RDIMM and what step is often missed?
Power off the server, open the chassis, align the notch on the 240-pin DDR3L module with the slot key, press firmly until both retention clips click, then verify in BIOS that the 16GB ECC registered module is detected at 1333MHz and 1.35V.
What maintenance or replacement will this 4Rx4 ECC RDIMM need over time?
No scheduled maintenance is required; if a correctable error count rises or the module fails POST, replace the 16GB DDR3L stick with an identical 4Rx4 registered part to keep ECC protection and rank balance.
What limit appears first when this 1.35V DDR3L module runs under sustained load?
The 1333MHz data rate and CL9 latency set the throughput ceiling; the memory controller will throttle before the 1.35V low-voltage chips reach a thermal limit.
More in ECC Server RAM
Similar items
SK hynix HMT31GR7BFR4A-H9 8GB DDR3 1333 ECC Registered Server RAM
- 8 GB
- DDR3 1333
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
A-Tech 16GB (2x8GB) DDR3L 1600 ECC RDIMM 1Rx4 1.35V 240-Pin Server RAM
- 16 GB (2 × 8 GB)
- DDR3L 1600
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
A-Tech 8GB (2x4GB) DDR3 1866 ECC UDIMM 1Rx8 1.5V server RAM
- 8 GB (2 × 4 GB)
- DDR3 1866





