A-Tech 16GB DDR3L 1333MHz ECC RDIMM 4Rx4 Server Memory
16GB DDR3L 1333MHz ECC registered server memory module with 4Rx4 organisation and 1.35V low-voltage operation
- Total capacity16 GB
- Rated speedDDR3L 1333 (PC3L 10600)
- ChipsetMajor Brand Chipset
- CAS latencyCL9
- Rated voltage1.35 V
- Buffer typeRegistered
- 16GB DDR3L 1333MHz capacity handles heavy server workloads
- ECC RDIMM registered design protects data integrity in critical applications
- Low 1.35V DDR3L voltage reduces power draw and heat output
- 4Rx4 rank configuration maximises density on 240-pin DIMM slots
- Direct replacement for Hynix HMT42GR7A/B/CMR4A-H9 modules
16GB DDR3L ECC RDIMM for Servers
This 16GB registered DDR3L module runs at 1333MHz with CL9 latency and 1.35V operation. It uses a 4Rx4 organisation and major-brand chips on a 240-pin DIMM. The stick is built for server and workstation platforms that require ECC error correction and registered signalling.
Replaces Hynix HMT42GR7A/B/CMR4A-H9
The module is a direct equivalent for three specific Hynix part numbers used in compatible systems. Swapping to this unit makes sense when a slot is empty or a failed stick must be replaced with an identical-capacity registered DIMM. Builders expanding beyond the board’s supported rank-per-channel limit should verify the manual first.
DDR3L voltage and registered signalling limits
The 1.35V low-voltage standard reduces power draw but requires a memory controller that explicitly supports DDR3L. Registered buffering adds a clock cycle of latency and restricts maximum module count per channel. Systems limited to unbuffered UDIMMs or higher-voltage DDR3 cannot use this memory.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $30.99
- Cheaper than about 90% of the 6,523 comparable items (median $188.99).
- Total capacity 16 GB
- Lower than about 60% of the 6,064 comparable items (median 32 GB).
- Price per GB $1.94 per GB
- Cheaper than about 94% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 16 GB |
| Performance | |
| Rated speed | DDR3L 1333 (PC3L 10600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 4Rx4 |
| Power | |
| Rated voltage | 1.35 V |
Questions about this item
Will this 240-pin DDR3L module fit my server's RDIMM slots?
Yes, the module uses the standard 240-pin DIMM form factor and registered DDR3L interface required for compatible server RDIMM slots.
What is the correct seating procedure for this registered ECC module?
Align the notch with the slot key, press firmly until both side latches click shut, and verify the system detects the full 16GB capacity at 1333MHz.
Does the 1.35V DDR3L voltage require any future adjustment or replacement?
No, the 1.35V low-voltage specification is fixed; the module runs at this voltage for its lifetime without needing adjustment or scheduled replacement.
More in ECC Server RAM
Similar items
SK hynix 4GB DDR3 1066 PC3-8500 2Rx4 ECC REG Server Memory HMT151R7BFR4C-H9
- 4 GB
- DDR3 1066
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
SK hynix HMT42GR7AFR4C-RD 16GB DDR3 1866 ECC Registered CL13 1.50V 2Rx4 server RAM
- 16 GB
- DDR3 1866
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
A-Tech 16GB (2x8GB) DDR3L 1600 ECC RDIMM 2Rx4 1.35V Server RAM
- 16 GB (2 × 8 GB)
- DDR3L 1600





