A-Tech 16GB DDR3L 1333MHz PC3L-10600 ECC RDIMM 2Rx4 Server Memory
16 GB DDR3L 1333 MHz ECC registered DIMM with 2Rx4 organization and 1.35 V low voltage operation
- Total capacity16 GB
- Rated speedDDR3L 1333 (PC3L 10600)
- ChipsetMajor Brand Chipset
- CAS latencyCL9
- Rated voltage1.35 V
- Buffer typeRegistered
- 16GB capacity supports heavy server workloads
- DDR3L 1333MHz speed delivers responsive data handling
- ECC registered design protects data integrity
- 35V low voltage reduces power draw
- 240-pin DIMM fits compatible server slots
16GB DDR3L 1333MHz ECC Registered DIMM
This 16GB DDR3L module runs at 1333MHz with CL9 latency and 1.35V low voltage. It is a registered ECC DIMM built with a 2Rx4 organisation for server and workstation platforms. The 240-pin form factor fits DDR3L slots in compatible systems.
Suits servers needing registered ECC memory
This module suits administrators upgrading or repairing servers that require registered ECC DDR3L at 1333MHz. It matches the listed Kingston part numbers for direct replacement. Buyers whose platforms only accept unbuffered non-ECC DDR3 or a different voltage should look at something else.
Registered ECC with 2Rx4 organisation
The registered ECC design with 2Rx4 rank organisation is the specification that determines compatibility. Systems that demand registered error-correcting memory at this rank configuration will accept this module; those that do not will not.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $28.99
- Cheaper than about 91% of the 6,523 comparable items (median $188.99).
- Total capacity 16 GB
- Lower than about 60% of the 6,064 comparable items (median 32 GB).
- Price per GB $1.81 per GB
- Cheaper than about 94% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 16 GB |
| Performance | |
| Rated speed | DDR3L 1333 (PC3L 10600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.35 V |
Questions about this item
Does my server need a DDR3L 240-pin RDIMM slot to use this 16GB module?
Yes, this is a DDR3L 240-pin registered DIMM that requires a compatible server or workstation motherboard with an RDIMM slot supporting 1.35V operation.
Can I mix this 1.35V DDR3L 1333MHz ECC RDIMM with existing 1.5V DDR3 modules in the same system?
Mixing voltages is not recommended; the motherboard will typically run all modules at the higher 1.5V, which exceeds this module's 1.35V rating and may cause instability.
How can I verify the module is running at 1333MHz with ECC active after installation?
Enter the BIOS or UEFI during boot and check the memory information screen; it should show 1333MHz speed, 16GB capacity, and ECC or registered status enabled.
More in ECC Server RAM
Similar items
SK hynix HMT31GR7BFR4A-H9 8GB DDR3 1333 ECC Registered Server RAM
- 8 GB
- DDR3 1333
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
A-Tech 16GB (2x8GB) DDR3L 1600 ECC RDIMM 1Rx4 1.35V 240-Pin Server RAM
- 16 GB (2 × 8 GB)
- DDR3L 1600
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
A-Tech 8GB (2x4GB) DDR3 1866 ECC UDIMM 1Rx8 1.5V server RAM
- 8 GB (2 × 4 GB)
- DDR3 1866





