Crucial CP16G60C36U5B 16GB DDR5 6000 desktop RAM
- 16 GB
- DDR5 6000
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR4 2133 desktop DIMM with CL15 latency and 1.2 V operation for AMD and Intel systems
This A-Tech module provides 16GB of DDR4 memory running at 2133MHz with a CL15 latency. It uses a standard 288-pin DIMM form factor and operates at 1.20V. The unbuffered, non-ECC design fits typical desktop motherboards that accept DDR4 PC4-17000 memory.
This single 16GB stick suits users adding capacity to a desktop with an open DDR4 slot and a memory controller that supports 2133MHz CL15 operation. It is not intended for systems requiring ECC or registered modules. Builders needing multi-channel kits or higher frequencies should consider different configurations.
The decisive specification is the 2133MHz CL15 rating at 1.20V. Your motherboard and CPU memory controller must support this exact speed and latency combination for the module to function at its rated performance. Verify the platform specifications before installation.
Measured against everything we stock in Desktop RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 16 GB |
| Performance | |
| Rated speed | DDR4 2133 (PC4 17000) |
| Processor | |
| Chipset | Major Brand Chips |
| Memory | |
| CAS latency | CL15 |
| Tested speed | 2133 |
| ECC support | No |
| Buffer type | Unbuffered |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Recommended for | AMD & Intel Compatible |
Yes, this A-Tech module is listed as a compatible replacement for the Crucial CT16G4DFD8213, CT16G4DFD8213.C16FH1, CT2K16G4DFD8213 and CT4K16G4DFD8213 part numbers.
This is a 288-pin DDR4 2133MHz UDIMM running at 1.2V with CL15 latency, matching the standard specification for that speed grade.
Dual-channel requires two identical modules installed in the correct paired slots; a single 16GB stick will run in single-channel mode.
More in Desktop RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?