We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular DDR4 server memory module with gold contacts and black chips

A-Tech

A-Tech 16GB DDR4 2133 ECC RDIMM 2Rx4 for Micron MTA36ASF2G72PZ-2G1A2IG server RAM

SKU CH-C1XB-97CVR

16 GB DDR4 2133 ECC RDIMM 2Rx4 module, 1.2 V CL15, compatible with Micron MTA36ASF2G72PZ-2G1A2IG series

  • Total capacity16 GB
  • Rated speedDDR4 2133 (PC4 17000)
  • ChipsetMicron Chipset
  • CAS latencyCL15
  • Rated voltage1.2 V
  • Buffer typeRegistered
  • ECC protection guards data integrity with registered DDR4 2133 operation
  • 16 GB capacity lifts server workloads using Micron chipset 2Rx4 modules
  • CL15 latency at 1.20 V delivers stable DDR4 PC4-17000 throughput
  • 288-pin RDIMM form factor fits compatible Micron MTA36ASF2G72PZ series slots
  • Lifetime warranty backs A-Tech quality testing for dependable server memory upgrades

16GB DDR4 2133 ECC RDIMM for Micron servers

This A-Tech module is a 16GB DDR4 2133 ECC registered DIMM built as a compatible replacement for specific Micron part numbers. It targets administrators upgrading or repairing enterprise servers and workstations that require registered memory with error correction. The module operates at the standard 1.20V DDR4 voltage. Quality assurance testing is performed on each unit.

Suits DDR4 RDIMM slots needing 2Rx4 CL15.

This memory suits systems that accept DDR4 2133 registered DIMMs with a 2Rx4 organisation and CL15 latency. It will not work in platforms that require unbuffered UDIMMs, non-ECC modules, or a different rank configuration such as 1Rx8. Builders needing higher frequencies, lower latencies, or consumer form factors should look at other product lines.

288-pin DDR4 DIMM interface decides fit

The module uses a 288-pin DDR4 DIMM interface, which is the single specification that determines whether it physically and electrically fits the target server. Verify that the system board lists DDR4 2133 RDIMM support before purchase.

How it compares

Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.

Price $59.99
Cheaper than about 81% of the 6,523 comparable items (median $188.99).
Total capacity 16 GB
Lower than about 60% of the 6,064 comparable items (median 32 GB).
Price per GB $3.75 per GB
Cheaper than about 83% of the 6,064 comparable items (median $7.25 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameA-Tech
Product lineCompatible Replacement for Micron
Model nameMTA36ASF2G72PZ-2G1A2IG, MTA36ASF2G72PZ-2G1A2II, MTA36ASF2G72PZ-2G1A2IK, MTA36ASF2G72PZ-2G1A2KG, MTA36ASF2G72PZ-2G1A2KK
Total capacity16 GB
Performance
Rated speedDDR4 2133 (PC4 17000)
Processor
ChipsetMicron Chipset
Memory
CAS latencyCL15
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Power
Rated voltage1.2 V

Questions about this item

How much heat and power does the 1.20V DDR4 2133 module add when the server runs all day?

At 1.20 volts the DDR4 2133 RDIMM draws minimal power and runs cool, so fan noise stays low even during continuous server workloads.

What must the system already provide for this 288-pin ECC RDIMM to work?

The motherboard needs a DDR4 DIMM slot that accepts registered ECC memory and a BIOS that supports 2Rx4 modules at 2133 MHz.

Will this 16GB CL15 registered stick run alongside older DDR4 2133 modules already in the server?

Yes, it will run at the lowest common speed and latency; match voltage at 1.20V and registered ECC type for stable mixed operation.

More in ECC Server RAM

Similar items