A-Tech 16GB DDR4 2400MHz ECC Registered RDIMM 1Rx4 CL17 1.2V Supermicro Certified
16 GB DDR4 RDIMM with ECC error correction and 2400 MHz speed for registered server memory slots
- Total capacity16 GB
- Rated speedDDR4 2400 (PC4 19200)
- ChipsetMicron Chipset
- CAS latencyCL17
- Rated voltage1.2 V
- Buffer typeRegistered
- Supermicro certified for guaranteed server compatibility
- 16GB DDR4 2400MHz capacity handles heavy workloads
- ECC registered design prevents data corruption errors
- Single rank 1Rx4 Micron chips ensure stable operation
- Low 1.2V voltage reduces system power draw
Server memory for ECC workloads
This 16GB DDR4 RDIMM is built for Supermicro platforms that require registered ECC memory. It suits administrators upgrading or populating servers where data integrity and stability are mandatory.
Thermals noise and power
Operating at the standard 1.2V DDR4 voltage, the module draws minimal power and generates little heat under normal server loads. No active cooling is required beyond typical chassis airflow.
Build integration
The single-rank 1Rx4 design fits a 288-pin RDIMM slot and is certified for Supermicro MEM-DR416L-CL03-ER24 configurations. It frees additional DIMM slots for future capacity expansion while maintaining registered signal integrity.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $81.99
- Cheaper than about 75% of the 6,523 comparable items (median $188.99).
- Total capacity 16 GB
- Lower than about 60% of the 6,064 comparable items (median 32 GB).
- Price per GB $5.12 per GB
- Cheaper than about 72% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | SuperMicro |
| Product line | Supermicro Certified |
| Model name | MEM-DR416L-CL03-ER24 |
| Total capacity | 16 GB |
| Performance | |
| Rated speed | DDR4 2400 (PC4 19200) |
| Processor | |
| Chipset | Micron Chipset |
| Memory | |
| CAS latency | CL17 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx4 |
| Power | |
| Rated voltage | 1.2 V |
Questions about this item
How do I install the 288-pin RDIMM in my Supermicro server and which slot order do people get wrong?
Align the notch on the module with the key in the DDR4 slot, press straight down until both retention clips click, and populate slots in the sequence shown in your motherboard manual — typically the first slot of each channel before adding a second.
What maintenance or replacement will the 1Rx4 ECC registered module need over its service life?
No routine maintenance is required; ECC corrects single-bit errors on the fly, and the module only needs replacement if the system logs uncorrectable errors or a DIMM fails POST.
What limit appears first when the 16 GB DDR4 2400 CL17 kit runs sustained workloads?
The 2400 MT/s data rate and CL17 latency set the throughput ceiling, so memory bandwidth saturates before the 1.2 V power envelope or thermal limits become a factor.
More in ECC Server RAM
Similar items
Kingston Technology Corp. KTD-PE426S8/8G 8GB ECC REG DDR4 2666MHz server RAM
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
Kingston Technology Corp. KVR18R13D4/16KF 16GB DDR3 1866 ECC Registered CL13 Server RAM
- 16 GB
- DDR3 1866
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
Kingston Technology Corp. KTD-PE421/8G 8GB DDR4 2133 ECC Registered Server RAM
- 8 GB
- DDR4 2133





