A-Tech 16GB DDR4 2400MHz ECC UDIMM 2Rx8 CL17 1.2V Server Memory
16 GB DDR4 2400 MHz ECC UDIMM module with CL17 latency and 1.2 V operation
- Total capacity16 GB
- Rated speedDDR4 2400 (PC4 19200)
- ChipsetMajor Brand Chipset
- CAS latencyCL17
- Rated voltage1.2 V
- Buffer typeUnbuffered
- 16GB DDR4 2400MHz ECC UDIMM for server reliability
- CL17 latency and 1.20V operation for stable performance
- 2Rx8 dual-rank design increases memory density
- 288-pin DIMM fits standard DDR4 server slots
- Compatible replacement for Dell A9755388, A9755661 and CX1KM
16GB DDR4 2400 ECC UDIMM for Servers
This 16GB DDR4 2400 ECC UDIMM module provides error-correcting memory for server and workstation platforms that require 288-pin DIMMs. It operates at 1.2V with a CL17 latency and uses a 2Rx8 organisation. The unbuffered design fits systems that do not accept registered modules.
Replaces Dell A9755388 and A9755661 Part Numbers
This module is a compatible equivalent for Dell part numbers including A9755388, A9755661, CX1KM, SNPCX1KMC/16G, SNPCX1KMDG/16G, and YXC0V. The upgrade is worthwhile when a supported system needs additional capacity or a replacement for a failed stick. It is not for platforms that require registered DIMMs or speeds beyond 2400 MT/s.
DDR4 2400 UDIMM Limits
The DDR4 2400 interface caps data transfer at PC4-19200 bandwidth, which restricts throughput on memory-intensive workloads compared to faster DDR4 standards. ECC UDIMM topology also limits maximum system capacity because unbuffered modules place a heavier electrical load on the memory controller than registered alternatives. Systems needing higher speeds or larger populations must use a different memory type.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $117.99
- Cheaper than about 63% of the 6,523 comparable items (median $188.99).
- Total capacity 16 GB
- Lower than about 60% of the 6,064 comparable items (median 32 GB).
- Price per GB $7.37 per GB
- Typical for this category: the median of 6,064 items is $7.25 per GB.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 16 GB |
| Performance | |
| Rated speed | DDR4 2400 (PC4 19200) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL17 |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.2 V |
Questions about this item
Does the 288-pin DDR4 DIMM fit standard unbuffered ECC UDIMM slots?
Yes, the module uses the 288-pin DDR4 DIMM form factor designed for ECC UDIMM slots in compatible servers and workstations.
What is the correct way to seat the 1.2V module so the ECC function initialises?
Align the notch with the slot key, press down firmly until both retention clips click, then verify the system reports 16GB at 2400MHz with ECC active in BIOS.
When should the 2Rx8 rank configuration be rechecked after a firmware update?
Recheck if the server shows reduced capacity, corrected errors increase, or the memory runs below 2400MHz after a BIOS or firmware change.
More in ECC Server RAM
Similar items
Brute Networks 16GB DDR4-2933 1Rx4 Registered ECC Server Memory
- 16 GB
- DDR4 2933
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
Brute Networks 16GB DDR4-2666 2Rx8 1.20V ECC Registered RDIMM Dell Compatible
- 16 GB
- DDR4 2666
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
Brute Networks 16GB DDR4-2133 2Rx8 CL15 Non-ECC UDIMM Dell 900847
- 16 GB
- CL15





