A-Tech 128GB DDR4 2400 ECC LRDIMM 2S4Rx4 1.20V CL17 server RAM
- 128 GB
- 288-Pin DDR4 SDRAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Two 128 GB DDR4 2400 ECC LRDIMM modules provide 256 GB of load-reduced server memory at 1.20 V with CL17 latency
Capacity 256GB (2 x 128GB)
This 256 GB kit contains two 128 GB DDR4 2400 modules built as ECC load-reduced DIMMs for servers and workstations. The octal-rank 3DS design lets compatible platforms address very high memory densities per slot. It is not suitable for desktop or laptop computers.
The 288-pin DIMMs install like standard registered memory but require a motherboard that supports LRDIMM and the 2S4Rx4 rank structure. Mis-seating or placing modules in unsupported channels is the most common cause of boot failure; always follow the system manual for population rules.
Suits administrators expanding memory in qualified DDR4 servers that accept 128 GB ECC LRDIMMs per slot. Builders needing non-ECC memory, desktop form factors, higher speeds, or capacities beyond what their platform qualifies should choose a different kit.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | A-Tech DDR4 Server Memory RAM |
| Model name | A-Tech 128 GB 2S4Rx4 PC4-2400T-L |
| Part number | AT128G2D4D2400LO4N12 V |
| Total capacity | 256 GB (2 × 128 GB) |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 2400 (PC4 19200) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL17 |
| ECC support | Yes |
| Buffer type | Load Reduced |
| Memory rank | 2S4Rx4 (8Rx4 3DS/TSV) |
| Kit configuration | Dual Channel Kit |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
Other versions of this model
Enter the system BIOS or UEFI and verify the memory frequency reads 2400 MHz with CAS latency 17; the modules operate at 1.20V standard DDR4 voltage, and the ECC Load Reduced function will be reported by the server management interface if the platform supports it.
The box contains two 128GB 288-pin DDR4 ECC LRDIMM modules (2S4Rx4 octal-rank 3DS/TSV); no heat spreaders, cables or additional hardware are included, and nothing else must be purchased separately provided the server has free 288-pin DDR4 DIMM slots.
Select this kit when your server or workstation specifically supports 128GB DDR4 ECC Load Reduced DIMMs with 2S4Rx4 octal-rank 3DS/TSV organisation and you need a matched 256GB dual-channel pair; otherwise choose a capacity and rank layout listed in your system's qualified-vendor list.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?