A-Tech 32GB (2x16GB) DDR5 5600MHz CL46 1.1V 262-Pin SODIMM laptop RAM
- 32 GB (2 × 16 GB)
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Quad-channel 32 GB DDR5 laptop kit at 4800 MHz with CL40 latency and 1.1 V operation
Capacity 32GB (4 x 8GB)
Speed DDR5 4800 (PC4 38400)
CAS Latency CL40
This A-Tech kit delivers 32 GB of DDR5 laptop memory in a matched set of four 8 GB SODIMM modules. It runs at the standard DDR5 4800 MT/s speed with CL40 latency and 1.10 V operation, using major-brand DRAM ICs on unbuffered, non-ECC boards. The 262-pin form factor fits current DDR5-compatible laptops, notebooks and all-in-one PCs.
Builders upgrading a DDR5 platform to the full 32 GB capacity supported by many modern mobile chipsets will benefit from the quad-channel configuration. Users who require error-correcting code memory, registered modules or lower CAS latency should look at other product lines, as this kit is strictly non-ECC unbuffered with CL40 timing.
The single figure that determines fitment is the 262-pin DDR5 SODIMM interface; only systems designed for this exact socket will accept the modules. Verify your device’s memory specifications before ordering to confirm DDR5 4800 support.
Measured against everything we stock in Laptop RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | A-Tech DDR5 Laptop Memory RAM |
| Model name | A-Tech 32 GB (4 × 8 GB) DDR5-4800 Laptop RAM Kit |
| Part number | NE-SS-0684 |
| Total capacity | 32 GB (4 × 8 GB) |
| Product type | 262-Pin DDR5 SO-DIMM |
| Performance | |
| Rated speed | DDR5 4800 (PC4 38400) |
| Memory | |
| CAS latency | CL40 |
| ECC support | No |
| Buffer type | Unbuffered |
| Kit configuration | Quad Channel Kit |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.1 V |
| Compatibility | |
| Recommended for | AMD & Intel Compatible |
| More details | |
| Variant | Major Brand DRAM IC Chips |
Other versions of this model
Align the notch on each 262-pin module with the slot key, insert at a slight angle, then press down firmly until both side clips click; the step often missed is verifying all four clips are fully latched before closing the chassis.
No scheduled maintenance is required; if a module fails, replace it with another DDR5 4800 CL40 1.1V 262-pin SODIMM of the same capacity to keep quad-channel operation intact.
The CL40 latency at 4800MHz sets the throughput ceiling; under continuous load the memory controller will hit that timing boundary before voltage or thermal limits become a factor.
More in Laptop RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?