A-Tech 32GB DDR5 5200 CL42 1.1V 288-Pin UDIMM Desktop RAM
- 32 GB
- DDR5 5200
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 32 GB quad-channel DDR5 kit running at 5200 MHz with CL42 latency and 1.1 V operation for desktop upgrades
Capacity 32GB (4 x 8GB)
Speed DDR5 5200 (PC5 41600)
CAS Latency CL42
Color Green/Black
This kit provides 32GB of desktop memory across four 8GB unbuffered DIMMs. It runs at the DDR5 standard voltage of 1.1V with a tested frequency of 5200MHz and CL42 latency. The modules use major-brand DRAM ICs and are built for AMD and Intel platforms that support DDR5 DIMMs.
Systems with four DIMM slots that benefit from quad-channel bandwidth will use this kit directly. Builds that only have two slots, require ECC or registered modules, or need lower latency than CL42 should consider a different configuration.
The decisive specification is the 288-pin DDR5 DIMM form factor operating at 1.1V with a PC5-41600 rating. If the motherboard manual lists DDR5-5200 unbuffered non-ECC support, this kit matches that requirement.
Measured against everything we stock in Desktop RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | A-Tech DDR5 Desktop Memory RAM |
| Model name | A-Tech 32 GB (4 × 8 GB) DDR5-5200 Desktop RAM Kit |
| Total capacity | 32 GB (4 × 8 GB) |
| Product color | Green/Black |
| Performance | |
| Rated speed | DDR5 5200 (PC5 41600) |
| Processor | |
| Chipset | Major Brand DRAM IC Chips |
| Memory | |
| CAS latency | CL42 |
| Tested speed | 5200 |
| ECC support | No |
| Buffer type | Unbuffered |
| Kit configuration | Quad Channel Kit |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.1 V |
| Compatibility | |
| Recommended for | AMD & Intel Compatible |
Other versions of this model
The kit runs at 5200 MT/s with a PC5-41600 bandwidth rating, providing the standard DDR5 data rate for desktop platforms that support this specification.
Each 8 GB module uses the standard 288-pin DDR5 DIMM form factor, so four adjacent DDR5 DIMM slots on a desktop motherboard are needed for the full quad-channel kit.
Populate the four slots designated for quad-channel use in your motherboard manual, seat each module until the retention clips click, then enable the 5200 MT/s speed in the BIOS — many builders forget the BIOS step and run at a lower default frequency.
More in Desktop RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?