Crucial CP16G60C36U5B 16GB DDR5 6000 desktop RAM
- 16 GB
- DDR5 6000
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
32GB DDR5 4800 desktop DIMM, CL40 at 1.1V, unbuffered non-ECC, 288-pin Micron chipset replacement for MTC16C2085S1UC48B and MTC16C2085S1UC48BA1
This 32GB DDR5 4800 DIMM is built as a direct replacement for Micron MTC16C2085S1UC48B and MTC16C2085S1UC48BA1 modules. It targets desktop owners who need a single 32GB stick to expand capacity or replace a failed unit. The module runs at the standard 1.1V DDR5 voltage with CL40 latency.
The 288-pin DIMM seats in any standard DDR5 desktop slot without tools or configuration changes. Most problems arise when the motherboard firmware has not been updated to support 4800 MT/s speeds or when the board limits maximum capacity per slot below 32GB. A mismatch in rank architecture can also prevent the system from posting.
Confirm that your desktop motherboard officially supports DDR5 memory and lists 4800 MT/s (PC5-38400) as a validated speed. Verify the maximum supported capacity per DIMM slot is at least 32GB and that the board accepts unbuffered non-ECC UDIMMs. Cross-reference the Micron part numbers above with your system vendor's qualified vendor list.
Measured against everything we stock in Desktop RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | Compatible Replacement for Micron |
| Model name | MTC16C2085S1UC48B, MTC16C2085S1UC48BA1 |
| Total capacity | 32 GB |
| Performance | |
| Rated speed | DDR5 4800 (PC5 38400) |
| Processor | |
| Chipset | Micron Chipset |
| Memory | |
| CAS latency | CL40 |
| Tested speed | 4800 |
| ECC support | No |
| Buffer type | Unbuffered |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.1 V |
| Compatibility | |
| Recommended for | Compatible Replacement for Micron MTC16C2085S1UC48B, MTC16C2085S1UC48BA1 |
Yes, it uses the 288-pin DDR5 DIMM form factor used by current desktop motherboards.
The module runs at 4800 MT/s with a standard 1.1 V DDR5 voltage; your board must support DDR5 at that speed and voltage.
Mixing capacities is possible if both modules are DDR5 4800 non-ECC unbuffered, but matched kits give the most stable operation.
More in Desktop RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?