A-Tech 4GB DDR3 1066MHz PC3-8500 ECC RDIMM 4Rx8 Micron MT36JSZF51272PDZ-1GF1D Server Memory
4GB DDR3 1066MHz ECC registered DIMM with Micron chips for server upgrades
- Total capacity4 GB
- Rated speedDDR3 1066 (PC3 8500)
- ChipsetMajor Brand Chipset
- CAS latencyCL7
- Rated voltage1.5 V
- Buffer typeRegistered
- 4GB capacity adds headroom for virtualization workloads
- DDR3 1066 MHz PC3-8500 speed matches legacy server specs
- ECC registered design corrects errors in mission-critical systems
- 240-pin DIMM form factor fits standard DDR3 slots
- 50V operation aligns with DDR3 voltage standard
Server Memory Upgrade
This A-Tech 4GB DDR3 module runs at 1066MHz with PC3-8500 bandwidth and CL7 latency. It is a registered ECC DIMM built for server and workstation platforms that require error correction and signal buffering. The 240-pin form factor operates at standard 1.5V DDR3 voltage.
Compatibility Profile
Suits administrators expanding capacity in systems validated for DDR3 registered ECC memory with 4Rx8 organisation. Not suited for desktop boards that accept only unbuffered non-ECC modules or for platforms limited to lower-rank configurations. Verify your system's qualified vendor list before ordering.
What the Bundle Changes
The package contains a single qualified memory module tested to Micron MT36JSZF51272PDZ-1GF1D equivalence. No cables, brackets or software are included; the upgrade effect comes entirely from adding registered ECC capacity to a compatible motherboard.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $21.99
- Cheaper than about 94% of the 6,523 comparable items (median $188.99).
- Total capacity 4 GB
- Lower than about 95% of the 6,064 comparable items (median 32 GB).
- Price per GB $5.50 per GB
- Cheaper than about 69% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 4 GB |
| Performance | |
| Rated speed | DDR3 1066 (PC3 8500) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL7 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 4Rx8 |
| Power | |
| Rated voltage | 1.5 V |
Questions about this item
My server only has DDR3 slots — will this 240-pin ECC RDIMM fit and run at 1066 MHz?
Yes, the module is a 240-pin DDR3 DIMM rated for 1066 MHz PC3-8500, so it installs directly into any DDR3 server slot that accepts registered ECC memory.
Can I mix this 4Rx8 registered stick with the older 2Rx4 unbuffered modules already in my system?
No, registered and unbuffered DIMMs cannot be used together; the memory controller will not initialise a mixed configuration.
After installing the module, how can I confirm it is running at the rated 1066 MHz with ECC active?
Check the BIOS memory information or run a tool such as CPU-Z; it should report 1066 MHz, CL7 timings, 1.50 V and ECC enabled.
More in ECC Server RAM
Similar items
Gigaram 64GB (4x16GB) DDR3-1600 ECC UDIMM CL11 1.5V
- 64 GB (4 × 16 GB)
- 240-Pin DDR3 SDRAM
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
SK hynix DDR2 64GB (4 x 16GB) 667 FB DIMM server RAM
- 64 GB (4 × 16 GB)
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
SK hynix HMT31GR7BFR4C-H9 8GB DDR3 1333 ECC Registered server RAM
- 8 GB
- DDR3 1333





