A-Tech 4GB DDR3 1333 ECC RDIMM 1Rx4 for HP 591750-071 593339-B21 595424-001 Server Memory
Adds 4 GB DDR3-1333 ECC registered server memory with 1Rx4 organisation for HP systems
- Total capacity4 GB
- Rated speedDDR3 1333 (PC3 10600)
- ChipsetMajor Brand Chipset
- CAS latencyCL9
- Rated voltage1.5 V
- Buffer typeRegistered
- 4GB capacity expands server memory headroom for heavier workloads
- DDR3 1333 MHz speed matches PC3-10600 system requirements
- ECC registered design detects and corrects single-bit errors automatically
- 1Rx4 single-rank layout keeps electrical loading low per channel
- 240-pin DIMM form factor fits standard DDR3 server slots
4GB DDR3 1333 ECC RDIMM
This 4GB DDR3 1333 registered ECC module is built for HP server and workstation systems that require registered memory. It suits administrators maintaining legacy platforms where registered DIMMs are mandatory for stability.
Major brand chips with 240-pin DIMM form factor
The module uses major brand chips on a standard 240-pin DIMM PCB and operates at the standard 1.50V DDR3 voltage. Registered buffering reduces electrical load on the memory controller, supporting reliable operation in multi-DIMM configurations.
Verify DDR3 registered ECC support
Confirm your system accepts DDR3 registered ECC DIMMs before ordering, as unbuffered or non-ECC modules are not interchangeable. Check that a free 240-pin slot exists and that the platform supports 1Rx4 organisation at the required speed.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $21.99
- Cheaper than about 94% of the 6,523 comparable items (median $188.99).
- Total capacity 4 GB
- Lower than about 95% of the 6,064 comparable items (median 32 GB).
- Price per GB $5.50 per GB
- Cheaper than about 69% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 4 GB |
| Performance | |
| Rated speed | DDR3 1333 (PC3 10600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx4 |
| Power | |
| Rated voltage | 1.5 V |
Questions about this item
Does the DDR3 1333 interface cap real-world throughput at PC3-10600?
Yes, the module runs at DDR3 1333 MHz with a PC3-10600 data-rate ceiling, so peak bandwidth is limited to that standard.
What physical slot and pin count does this 240-pin RDIMM require?
It fits a standard DDR3 DIMM socket with 240 pins; the registered design adds a buffer chip but does not change the slot keying.
How is the module installed and what step is often missed?
Align the notch with the slot key, press firmly until both retention clips click, then verify the system detects the full 4 GB and ECC status in BIOS.
More in ECC Server RAM
Similar items
Gigaram 64GB (4x16GB) DDR3-1600 ECC UDIMM CL11 1.5V
- 64 GB (4 × 16 GB)
- 240-Pin DDR3 SDRAM
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
SK hynix DDR2 64GB (4 x 16GB) 667 FB DIMM server RAM
- 64 GB (4 × 16 GB)
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
SK hynix HMT31GR7BFR4C-H9 8GB DDR3 1333 ECC Registered server RAM
- 8 GB
- DDR3 1333





