A-Tech 4GB DDR3 1333MHz ECC Unbuffered UDIMM 240-Pin Server RAM
4GB DDR3-1333 ECC unbuffered UDIMM with CL9 latency for server memory upgrades
- Total capacity4 GB
- Rated speedDDR3 1333 (PC3 10600)
- ChipsetMajor Brand Chipset
- CAS latencyCL9
- Rated voltage1.5 V
- Buffer typeUnbuffered
- ECC protection prevents data errors in server workloads
- 1333 MHz DDR3 speed handles demanding applications
- 2Rx8 dual-rank design increases memory density
- Supermicro certified for guaranteed compatibility
- 5 V standard voltage ensures stable operation
A-Tech 4GB DDR3 1333MHz ECC UDIMM
This 4GB DDR3 1333MHz ECC unbuffered UDIMM is built for servers and workstations that require error-correcting memory. It operates at 1.5V with CL9 latency and uses a 240-pin form factor. The module carries Supermicro certification and uses Hynix chips for validated compatibility.
Suits ECC DDR3 systems only
This module fits systems that accept DDR3 ECC unbuffered UDIMMs at 1333MHz. It will not work in platforms that require registered or fully buffered DIMMs. It is also unsuitable for any board limited to non-ECC memory or a different DDR generation.
Single rank constraint
The module is organised as 2Rx8 dual rank, which counts as two logical ranks per DIMM slot. Systems with a strict single-rank-per-channel limit cannot use this part. Buyers must verify that their motherboard or server supports dual-rank unbuffered ECC UDIMMs before ordering.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $45.99
- Cheaper than about 85% of the 6,523 comparable items (median $188.99).
- Total capacity 4 GB
- Lower than about 95% of the 6,064 comparable items (median 32 GB).
- Price per GB $11.50 per GB
- Pricier than about 71% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | SuperMicro |
| Product line | Supermicro Certified |
| Model name | MEM-DR340L-HL03-EU13 |
| Total capacity | 4 GB |
| Performance | |
| Rated speed | DDR3 1333 (PC3 10600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.5 V |
Questions about this item
Does DDR3 1333MHz PC3-10600 set the maximum data rate for this module?
Yes, the module runs at DDR3 1333MHz, which is the PC3-10600 standard, so that speed is the ceiling for each stick.
Will this 240-pin ECC UDIMM fit a standard server DIMM slot?
The stick uses the 240-pin ECC UDIMM form factor, matching the keying and length of regular DDR3 server slots.
How is the module installed, and what step is often missed?
Align the notch with the slot key, press straight down until both side clips click, then confirm the system recognises the full 4GB in BIOS.
More in ECC Server RAM
Similar items
Kingston Technology Corp. KTD-PE432S8/8G 8GB DDR4 3200 ECC Registered server RAM
- 8 GB
- DDR4 3200
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
Kingston Technology Corp. KVR16E11S8/4 4GB DDR3 1600 ECC Unbuffered server RAM
- 4 GB
- DDR3 1600
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600





