A-Tech 4GB DDR3 1333MHz PC3-10600 ECC RDIMM 2Rx4 Server Memory
4GB DDR3 1333MHz ECC registered DIMM for server upgrades, 2Rx4 with major-brand chips
- Total capacity4 GB
- Rated speedDDR3 1333 (PC3 10600)
- ChipsetMajor Brand Chipset
- CAS latencyCL9
- Rated voltage1.5 V
- Buffer typeRegistered
- ECC protection guards data integrity with registered DDR3 design
- 1333 MHz DDR3 speed matches PC3-10600 server specs
- 4 GB capacity on a single 240-pin DIMM module
- 50 V standard voltage keeps power draw stable
- Replaces Hynix HMT151R7AFP4C-H9 and related part numbers
Direct Hynix Replacement
This A-Tech 4 GB DDR3 module is built as a drop-in equivalent for Hynix HMT151R7AFP4C-H9, HMT151R7BFR4C-H9 and HMT151R7TFR4C-H9 parts. It targets administrators upgrading or repairing registered-ECC server and workstation platforms that require 240-pin DDR3 1333 MHz memory.
Registered ECC DIMM for Multi-Module Arrays
The 2Rx4 registered design places a register on the command bus, reducing electrical load on the memory controller so larger populations of DIMMs can run stably at 1.5 V. Systems that accept unbuffered UDIMMs or non-ECC memory cannot use this module; verify the platform specifically supports registered ECC RDIMMs before installation.
Tested Module with Lifetime Coverage
Every stick passes A-Tech’s validation suite before shipping, ensuring the major-brand chips meet the stated CL9 latency and PC3-10600 timing. A lifetime warranty and US-based technical support are included, giving administrators a direct path for troubleshooting or replacement if a fault appears in service.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $23.99
- Cheaper than about 93% of the 6,523 comparable items (median $188.99).
- Total capacity 4 GB
- Lower than about 95% of the 6,064 comparable items (median 32 GB).
- Price per GB $6.00 per GB
- Cheaper than about 64% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 4 GB |
| Performance | |
| Rated speed | DDR3 1333 (PC3 10600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.5 V |
Questions about this item
Does the registered design and CL9 latency limit throughput on a 1333MHz bus under sustained load?
The module runs at 1333MHz with CL9 timing and registered buffering, which adds one cycle of address/command delay but keeps throughput steady on a PC3-10600 bus.
How much heat and power does a 1.5V registered DIMM produce when running continuously?
At 1.5V standard DDR3 voltage the 4GB RDIMM draws typical DDR3 power and generates moderate heat; registered buffering adds minimal extra dissipation.
What motherboard slot and chipset support are required for this 240-pin DDR3 RDIMM?
A 240-pin DDR3 DIMM slot with registered ECC support in the chipset is required; the module uses major-brand chips at 1.5V.
More in ECC Server RAM
Similar items
Simmtec, Inc 16GB (2x8GB) DDR3 PC3-10600 1333MHz Server Memory for HP ProLiant DL320 G6 DL360 G6 G7 DL370 G6
- 16 GB (2 × 8 GB)
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
A-Tech 8GB DDR3 1600 ECC RDIMM 2Rx8 1.5V 240-Pin Server RAM
- 8 GB
- DDR3 1600
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600





