We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

A-Tech

A-Tech 4GB DDR3 1600MHz CL11 desktop RAM

SKU CH-4FYN-S69KN

4GB DDR3 1600MHz CL11 desktop DIMM for upgrading compatible Corsair systems

  • Total capacity4 GB
  • Rated speedDDR3 1600 (PC3 12800)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL11
  • Tested speed1600
  • Rated voltage1.5 V
  • 4 GB capacity lets you run more applications at once
  • DDR3 1600 MHz speed moves data quickly through the system
  • CL11 latency keeps response times low for everyday tasks
  • 5 V standard voltage works with typical desktop power delivery
  • 240-pin DIMM form factor fits standard desktop memory slots

4GB DDR3 1600MHz Desktop Upgrade

This single 4GB DDR3 module runs at 1600MHz with CL11 latency and standard 1.50V operation. It is an unbuffered non-ECC DIMM built for desktop systems needing a straightforward capacity increase. The 240-pin form factor fits typical DDR3 motherboard slots without extra configuration.

Standard voltage and no heat spreader

Operating at the JEDEC 1.50V level, the module draws the same power as stock DDR3 parts and produces no more heat than the original equipment. Without a heat spreader the profile stays low, so airflow from the CPU cooler passes freely over the chips. Acoustic impact is zero because the memory has no moving parts.

Replaces listed Corsair DDR3 kits

The module is validated as a compatible equivalent for Corsair CMY8GX3M2A1600C9R, CMZ12GX3M3A1600C9, CMX8GX3M2A1600C11, CMX8GX3M2A1600C9 and CMX8GX3M2B1600C9. Swapping a failed stick or adding one 4GB unit to an empty slot restores dual-channel bandwidth when paired with an identical module. The upgrade makes sense when the system still uses DDR3 and the board supports 1600MHz CL11 timing.

How it compares

Measured against everything we stock in Desktop RAM, at today’s prices. Recalculated every night.

Price $15.99
Cheaper than about 92% of the 3,647 comparable items (median $90.99).
Total capacity 4 GB
Lower than about 80% of the 3,251 comparable items (median 16 GB).
Price per GB $4.00 per GB
Cheaper than about 84% of the 3,251 comparable items (median $6.75 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameA-Tech
Product lineCompatible Replacement for Corsair
Model nameCMY8GX3M2A1600C9R, CMZ12GX3M3A1600C9, CMX8GX3M2A1600C11, CMX8GX3M2A1600C9, CMX8GX3M2B1600C9
Total capacity4 GB
Performance
Rated speedDDR3 1600 (PC3 12800)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL11
Tested speed1600
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Power
Rated voltage1.5 V
Compatibility
Recommended forCompatible Replacement for Corsair CMY8GX3M2A1600C9R, CMZ12GX3M3A1600C9, CMX8GX3M2A1600C11, CMX8GX3M2A1600C9, CMX8GX3M2B1600C9

Questions about this item

How do I install this 240-pin DDR3 DIMM and what step do people get wrong?

Power off the PC, open the case, align the notch on the 240-pin module with the slot key, press down firmly until both side clips click, then power on; the step people miss is pushing hard enough to seat both clips fully.

What maintenance or replacement will this 1.5 V DDR3 module need later?

No routine maintenance is required; if errors appear years later, run a memory test and replace the module if it fails, otherwise it runs for the life of the system.

What limit shows up first on this CL11 1600 MHz kit under sustained load?

The CL11 latency at 1600 MHz sets the bandwidth ceiling; under heavy sustained use the memory controller hits that timing limit before voltage or temperature become factors.

More in Desktop RAM

Similar items