A-Tech 4GB DDR3 1600MHz ECC RDIMM 1Rx4 Server Memory
4GB DDR3 1600MHz ECC registered server memory with CL11 latency and 1.5V operation
- Total capacity4 GB
- Rated speedDDR3 1600 (PC3 12800)
- ChipsetMajor Brand Chipset
- CAS latencyCL11
- Rated voltage1.5 V
- Buffer typeRegistered
- 4GB capacity expands server memory headroom for heavier workloads
- DDR3 1600MHz speed delivers 12800 MT/s data rate for responsive performance
- ECC RDIMM with registered design corrects errors and stabilises multi-module configurations
- 1Rx4 single-rank layout uses major-brand chips for consistent signal integrity
- 240-pin DIMM at 1.5V fits standard DDR3 server slots without voltage adapters
4GB DDR3 ECC Registered Server Memory
This 4GB DDR3 1600MHz ECC RDIMM is built for servers and workstations that require registered, error-correcting memory. It operates at 1.5V with CL11 latency and uses a 240-pin DIMM form factor with a 1Rx4 rank configuration.
Suits systems needing registered ECC DDR3 modules
This module fits servers and workstations validated for registered ECC DDR3 memory at 1600MHz. Buyers whose platforms require unbuffered UDIMMs, non-ECC memory, or different voltage levels cannot use this product.
Registered ECC with 1Rx4 organisation
The single specification that decides fit is the registered ECC design with 1Rx4 organisation. Only systems qualified for this exact registered ECC configuration will accept the module.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $21.99
- Cheaper than about 94% of the 6,523 comparable items (median $188.99).
- Total capacity 4 GB
- Lower than about 95% of the 6,064 comparable items (median 32 GB).
- Price per GB $5.50 per GB
- Cheaper than about 69% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 4 GB |
| Performance | |
| Rated speed | DDR3 1600 (PC3 12800) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL11 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx4 |
| Power | |
| Rated voltage | 1.5 V |
Questions about this item
Will this 240-pin DDR3 DIMM fit my server's registered memory slots?
Yes, it is a 240-pin DDR3 DIMM built to the standard RDIMM form factor for registered server slots.
What is the correct way to seat this registered ECC module, and what step do people skip?
Align the notch with the slot key, press straight down until both side clips click, and verify the module height matches adjacent RDIMMs.
When should I plan to replace this 1.5V DDR3 1600MHz module?
Replace it if memory diagnostics report correctable ECC errors rising over time or if a server firmware update requires a different voltage or speed.
More in ECC Server RAM
Similar items
Gigaram 64GB (4x16GB) DDR3-1600 ECC UDIMM CL11 1.5V
- 64 GB (4 × 16 GB)
- 240-Pin DDR3 SDRAM
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
SK hynix DDR2 64GB (4 x 16GB) 667 FB DIMM server RAM
- 64 GB (4 × 16 GB)
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
SK hynix HMT31GR7BFR4C-H9 8GB DDR3 1333 ECC Registered server RAM
- 8 GB
- DDR3 1333





