We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular DDR3L DIMM module with gold contacts and black chips

A-Tech

A-Tech 4GB DDR3L 1333 ECC RDIMM 2Rx4 for IBM-Lenovo 46C0567 47J0133 49Y1394 49Y1412 Server Memory

SKU CH-8QCA-0BKVB

A 4GB DDR3L 1333 ECC registered DIMM with 1.35V low-voltage operation for IBM-Lenovo servers

  • Total capacity4 GB
  • Rated speedDDR3L 1333 (PC3L 10600)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL9
  • Rated voltage1.35 V
  • Buffer typeRegistered
  • 4GB DDR3L ECC registered memory expands server capacity
  • 35 V low-voltage DDR3L 1333 reduces power draw
  • 2Rx4 registered DIMM design improves signal integrity
  • CL9 latency at PC3L-10600 supports responsive workloads
  • Compatible replacement for IBM-Lenovo 46C0567 47J0133 49Y1394 49Y1412

A-Tech 4GB DDR3L 1333 ECC RDIMM

This 4GB DDR3L registered DIMM runs at 1333MHz with a low 1.35V voltage and CL9 latency. It uses a 2Rx4 organisation and major-brand chips on a 240-pin form factor. The module is built as a direct replacement for IBM-Lenovo part numbers 46C0567, 47J0133, 49Y1394 and 49Y1412. It targets server and workstation administrators who need validated ECC memory for supported platforms.

Suited for ECC registered DDR3L slots only

This module fits systems that specifically require DDR3L registered ECC memory at 1333MHz. It is not for desktops or laptops that accept only unbuffered non-ECC UDIMMs. It will not work in platforms limited to 1.5V DDR3 or those that cannot address registered modules. Buyers needing higher capacity per slot or a different voltage should verify their hardware documentation before ordering.

Registered ECC with 2Rx4 organisation

The defining specification is the registered ECC design combined with a 2Rx4 rank structure at 1.35V. This combination determines whether the memory will initialise in your server's memory controller. Match the part numbers listed — 46C0567, 47J0133, 49Y1394, 49Y1412 — against your system's qualified vendor list to confirm compatibility.

How it compares

Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.

Price $21.99
Cheaper than about 94% of the 6,523 comparable items (median $188.99).
Total capacity 4 GB
Lower than about 95% of the 6,064 comparable items (median 32 GB).
Price per GB $5.50 per GB
Cheaper than about 69% of the 6,064 comparable items (median $7.25 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameA-Tech
Total capacity4 GB
Performance
Rated speedDDR3L 1333 (PC3L 10600)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL9
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Power
Rated voltage1.35 V

Questions about this item

Does the DDR3L 1333 PC3L-10600 interface cap memory speed at 1333 MHz?

Yes, the module is rated at DDR3L 1333 (PC3L-10600) so the maximum data rate is 1333 MT/s when installed in a compatible server.

What physical slot does the 240-pin RDIMM need to fit?

It requires a standard DDR3 240-pin DIMM socket on the server motherboard; the registered design will not work in unbuffered desktop slots.

How is the ECC RDIMM installed, and what step is often missed?

Power down the server, open the chassis, align the notch on the 240-pin module with the key in the slot, press firmly until both retention clips click, then verify in BIOS that ECC and registered mode are enabled.

More in ECC Server RAM

Similar items