A-Tech 4GB DDR3L 1333 ECC RDIMM 2Rx8 Server RAM
4GB DDR3L 1333 ECC registered DIMM with 2Rx8 organisation and 1.35V low-voltage operation
- Total capacity4 GB
- Rated speedDDR3L 1333 (PC3L 10600)
- ChipsetMajor Brand Chipset
- CAS latencyCL9
- Rated voltage1.35 V
- Buffer typeRegistered
- ECC protection guards data integrity with registered DDR3L design
- Low 1.35V voltage reduces power draw and heat output
- 1333MHz CL9 speed delivers responsive server workload performance
- 2Rx8 240-pin layout fits compatible DDR3L RDIMM slots
- Major-brand chips tested for reliable long-term operation
4GB DDR3L ECC RDIMM for servers
This 4 GB registered DIMM runs at 1333 MHz with CL9 latency and operates at 1.35 V. It uses a 2Rx8 organisation and major-brand chips on a 240-pin PCB. The module adds error-correcting memory capacity to compatible server or workstation platforms.
Direct replacement for Hynix HMT351R7 series
The stick matches the HMT351R7AFR8A-H9, HMT351R7BFR8A-H9, HMT351R7CFR8A-H9 and HMT351R7EFR8A-H9 part numbers. Upgrading is worthwhile when the system supports DDR3L registered ECC memory and the workload benefits from additional capacity or from replacing a failed module.
Verify DDR3L registered ECC support before ordering
Confirm that the motherboard or chassis accepts 240-pin DDR3L RDIMMs at 1.35 V and that the BIOS enables ECC functionality. Systems limited to unbuffered non-ECC DDR3 or to later DDR generations will not accept this module.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $22.99
- Cheaper than about 93% of the 6,523 comparable items (median $188.99).
- Total capacity 4 GB
- Lower than about 95% of the 6,064 comparable items (median 32 GB).
- Price per GB $5.75 per GB
- Cheaper than about 66% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 4 GB |
| Performance | |
| Rated speed | DDR3L 1333 (PC3L 10600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.35 V |
Questions about this item
Will the 240-pin DDR3L RDIMM fit my server's DIMM slots?
This module uses the standard 240-pin DDR3 DIMM form factor; it fits any server or workstation slot keyed for DDR3L registered memory.
How do I install the registered ECC module correctly?
Power down the system, open the chassis, align the notch on the 240-pin module with the slot key, press firmly until both retention clips click, then power on and verify the new capacity in BIOS.
When should I expect to replace this 4 GB DDR3L 1333 module?
DDR3L RDIMMs have no moving parts and typically last the life of the server; replace only if memory diagnostics report uncorrectable ECC errors or the system no longer posts with the module installed.
More in ECC Server RAM
Similar items
Kingston Technology Corp. KVR400D2S8R3/1G 1GB DDR2 400 server RAM
- 1 GB
- DDR2 400
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
A-Tech 8GB 2Rx8 PC3L-12800R DDR3L 1600MHz ECC RDIMM 1.35V Server RAM
- 8 GB
- DDR3L 1600
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
A-Tech 8GB DDR3L 1333MHz ECC RDIMM 2Rx8 1.35V server RAM
- 8 GB
- DDR3L 1333





