A-Tech 4GB DDR3L 1333MHz ECC RDIMM 1Rx4 Server Memory
4GB DDR3L 1333MHz ECC registered DIMM for HP servers, 1.35V low-voltage operation
- Total capacity4 GB
- Rated speedDDR3L 1333 (PC3L 10600)
- ChipsetMajor Brand Chipset
- CAS latencyCL9
- Rated voltage1.35 V
- Buffer typeRegistered
- ECC protection guards data integrity with registered DDR3L design
- Low 1.35V voltage reduces power draw in DDR3L modules
- 1333MHz speed delivers PC3L-10600 bandwidth for server workloads
- 240-pin DIMM form factor fits compatible HP server slots
- 1Rx4 single-rank layout optimises memory controller efficiency
Product identity
This is a 4GB DDR3L registered ECC DIMM built for server and workstation platforms. It targets administrators who need to replace or expand memory in compatible HP systems using low-voltage modules.
Thermals noise power
The module operates at 1.35V, reducing power draw compared to standard DDR3 parts. Registered buffering and ECC circuitry add minimal heat under typical server workloads. No active cooling is required on the module itself.
Build fit
The 240-pin DIMM fits DDR3L slots that support registered ECC memory. It frees a single slot for a 4GB capacity increase. Buyers needing higher densities or non-ECC unbuffered memory should look elsewhere.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $20.99
- Cheaper than about 94% of the 6,523 comparable items (median $188.99).
- Total capacity 4 GB
- Lower than about 95% of the 6,064 comparable items (median 32 GB).
- Price per GB $5.25 per GB
- Cheaper than about 71% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 4 GB |
| Performance | |
| Rated speed | DDR3L 1333 (PC3L 10600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx4 |
| Power | |
| Rated voltage | 1.35 V |
Questions about this item
How do I install this 240-pin DDR3L RDIMM and which orientation mistake should I avoid?
Align the notch on the module with the key in the slot, press straight down until both clips snap shut, and never force it backwards — the single notch only fits one way.
What maintenance or replacement will this ECC registered module need over time?
No routine maintenance is required; if a correctable error count rises or the module fails, replace the 4GB stick with an identical DDR3L 1333MHz 1Rx4 RDIMM.
What limit appears first when this 1.35V registered DIMM runs sustained workloads?
The 1333MHz data rate and CL9 latency set the throughput ceiling before voltage or thermal limits become a factor.
More in ECC Server RAM
Similar items
Kingston Technology Corp. KVR16LE11S8/4KF 4GB DDR3 1600 ECC CL11 1.35V server RAM
- 4 GB
- DDR3 1600
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
Kingston Technology Corp. KCP432SS88 server RAM DDR4 3200 MHz CL22 1.20 V 260-pin 8 GB
- CL1.5
- Standard Edition
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
A-Tech 8GB DDR3 1066MHz ECC RDIMM 4Rx8 Hynix HMT41GV7BMR8C-G7 HMT41GV7AMR8C-G7 Server Memory
- 8 GB
- DDR3 1066





