A-Tech 4GB DDR3L 1600 ECC RDIMM 1Rx4 240-Pin Server RAM
4GB DDR3L 1600 ECC registered server memory module with 1.35V low voltage and CL11 latency for compatible systems
- Total capacity4 GB
- Rated speedDDR3L 1600 (PC3L 12800)
- ChipsetMajor Brand Chipset
- CAS latencyCL11
- Rated voltage1.35 V
- Buffer typeRegistered
- 4GB capacity expands server memory headroom for heavier workloads
- DDR3L 1600 speed delivers PC3L-12800 bandwidth for responsive data access
- ECC registered design detects and corrects errors to protect critical data
- 35 V low-voltage operation reduces power draw and heat in dense chassis
- 240-pin DIMM form factor fits standard DDR3 server memory slots
4GB DDR3L 1600 ECC RDIMM Server Module
This 4 GB A-Tech module runs at DDR3L 1600 (PC3L-12800) with CL11 timing and 1.35 V operation. It is built as a registered ECC DIMM using a 1Rx4 layout on major-brand chips. The 240-pin form factor fits server and workstation boards that require registered DDR3L memory.
Suits admins upgrading compatible DDR3L platforms
Buyers whose systems demand unbuffered non-ECC memory cannot use this registered ECC stick. Builders needing higher-capacity modules or a different voltage should verify their platform requirements before ordering.
Registered ECC with 1Rx4 organisation
The single-rank x4 configuration and registered buffer determine whether the motherboard's memory controller will accept the module. Match this spec exactly to the system's qualified-vendor list for successful operation.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $21.99
- Cheaper than about 94% of the 6,523 comparable items (median $188.99).
- Total capacity 4 GB
- Lower than about 95% of the 6,064 comparable items (median 32 GB).
- Price per GB $5.50 per GB
- Cheaper than about 69% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 4 GB |
| Performance | |
| Rated speed | DDR3L 1600 (PC3L 12800) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL11 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx4 |
| Power | |
| Rated voltage | 1.35 V |
Questions about this item
Does my motherboard need DDR3L 240-pin registered DIMM slots to use this 4GB module?
Yes, the module is a DDR3L 1600 240-pin registered DIMM and will only work in motherboards that support DDR3L ECC registered memory.
Can I mix this 1Rx4 CL11 stick with existing 1Rx8 or 2Rx4 DDR3L registered DIMMs?
Mixing ranks is often possible but depends on the motherboard's memory controller; check the system manual for supported rank populations per channel.
How do I confirm the module runs at 1.35 V and 1600 MT/s after installation?
Enter the BIOS or use a system-information utility to verify the detected voltage reads 1.35 V and the operating speed shows 1600 MT/s.
More in ECC Server RAM
Similar items
Gigaram 64GB (4x16GB) DDR3-1600 ECC UDIMM CL11 1.5V
- 64 GB (4 × 16 GB)
- 240-Pin DDR3 SDRAM
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
SK hynix DDR2 64GB (4 x 16GB) 667 FB DIMM server RAM
- 64 GB (4 × 16 GB)
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
SK hynix HMT31GR7BFR4C-H9 8GB DDR3 1333 ECC Registered server RAM
- 8 GB
- DDR3 1333





