We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

A-Tech

A-Tech 4GB DDR3L 1600 ECC UDIMM 1Rx8 1.35V Server RAM

SKU CH-NRYG-9KQRX

4GB DDR3L 1600 ECC unbuffered DIMM with single-rank x8 chips at 1.35V for servers and workstations

  • Total capacity4 GB
  • Rated speedDDR3L 1600 (PC3L 12800)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL11
  • Rated voltage1.35 V
  • Buffer typeUnbuffered

Speed DDR3L 1600 (PC3L 12800)

  • ECC protection prevents data corruption in critical workloads
  • 35V low-voltage DDR3L reduces power draw
  • 1600 MHz PC3L-12800 speed accelerates server responsiveness
  • Single-rank 1Rx8 layout eases memory-channel population
  • 240-pin UDIMM fits DDR3/DDR3L server and workstation slots

4 GB DDR3L ECC UDIMM for Servers

This 4 GB DDR3L module runs at 1600 MHz with CL11 latency and 1.35 V low voltage. It is built as an unbuffered ECC UDIMM with a single-rank 1Rx8 layout on a 240-pin form factor. The stick targets administrators who need to expand memory in servers or workstations that require ECC error correction and DDR3L signalling.

Suits ECC DDR3L platforms only

The module fits systems that explicitly support DDR3 or DDR3L ECC unbuffered DIMMs. It will not work in desktop or laptop computers that use non-ECC consumer memory, nor in servers that demand registered or load-reduced DIMMs. Buyers who need higher capacity per slot or registered signalling should look at different modules.

Single-rank 1Rx8 organisation

The 1Rx8 configuration places all chips on one rank with an x8 data width, which affects how the memory controller populates channels and reaches maximum supported capacity. Verify the platform’s rank and population rules before purchasing to ensure the module is recognised and operates at the rated 1600 MHz speed.

How it compares

Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.

Price $15.99
Cheaper than about 97% of the 6,523 comparable items (median $188.99).
Total capacity 4 GB
Lower than about 95% of the 6,064 comparable items (median 32 GB).
Price per GB $4.00 per GB
Cheaper than about 81% of the 6,064 comparable items (median $7.25 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameA-Tech
Product lineA-Tech DDR3 Server Memory RAM
Model nameA-Tech 4 GB 1Rx8 PC3L-12800E
Total capacity4 GB
Performance
Rated speedDDR3L 1600 (PC3L 12800)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL11
ECC supportYes
Buffer typeUnbuffered
Memory rank1Rx8
Power
Rated voltage1.35 V

Other versions of this model

5 more in the same range

Questions about this item

How do I install the 240-pin DDR3L ECC UDIMM, and what step do people get wrong?

Align the notch on the module with the key in the slot, press firmly until both retention clips click, and verify the system is a DDR3 server or workstation — desktops and laptops will not accept this ECC unbuffered DIMM.

What maintenance or replacement will the 1Rx8 DDR3L module need later?

No scheduled maintenance is required; if a memory error appears, reseat the module and run a diagnostic — persistent faults mean the stick must be replaced.

What limit appears first when the CL11 1600 MHz kit runs under sustained load?

The 1.35 V DDR3L voltage ceiling and CL11 latency bound throughput before thermal throttling becomes a factor.

More in ECC Server RAM

Similar items