A-Tech 4GB DDR3L 1600 ECC UDIMM 1Rx8 CL11 1.35V Server Memory
4GB DDR3L 1600 ECC UDIMM module with 1.35V low-voltage operation and CL11 latency for server upgrades
- Total capacity4 GB
- Rated speedDDR3L 1600 (PC3L 12800)
- ChipsetMajor Brand Chipset
- CAS latencyCL11
- Rated voltage1.35 V
- Buffer typeUnbuffered
- ECC protection prevents data errors in server workloads
- 35V DDR3L reduces power draw versus standard DDR3
- 1600 MHz CL11 timing delivers responsive throughput for multitasking
- Single-rank 1Rx8 layout keeps signal integrity clean on 240-pin UDIMM slots
- Tested compatible replacement for Kingston KTL-TS316ELV/4G, KFJ-PM316ES/4G, KTA-MP1600S/4G, D51272K110S
Target system and purpose
This 4GB DDR3L ECC UDIMM is built for servers and workstations that require error-correcting memory at 1.35V. It suits administrators upgrading compatible platforms where low-voltage unbuffered DIMMs are specified.
Decisive specification
The module runs at DDR3L 1600 (PC3L-12800) with CL11 latency and a 1Rx8 organisation. ECC is supported and the stick is unbuffered, so it will only work in slots that accept unbuffered ECC DDR3L at this exact voltage and speed.
Installation and common issues
The 240-pin DIMM installs like any standard UDIMM; align the notch and press until the latches click. Problems usually arise when the system expects registered or 1.5V DDR3 modules, or when the BIOS does not recognise the specific 1Rx8 density.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $19.99
- Cheaper than about 95% of the 6,523 comparable items (median $188.99).
- Total capacity 4 GB
- Lower than about 95% of the 6,064 comparable items (median 32 GB).
- Price per GB $5.00 per GB
- Cheaper than about 73% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 4 GB |
| Performance | |
| Rated speed | DDR3L 1600 (PC3L 12800) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL11 |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Memory rank | 1Rx8 |
| Power | |
| Rated voltage | 1.35 V |
Questions about this item
What does the 1600 MHz speed mean once this module is installed in a server?
The module runs at DDR3L 1600 (PC3L-12800), so the memory controller will operate the bus at 1600 MT/s provided the platform supports that data rate; actual throughput is capped by the slowest DIMM in the channel.
How does the DDR3L 1.35 V standard affect compatibility with a 1.5 V DDR3 slot?
DDR3L modules are backward-compatible with 1.5 V DDR3 slots; the memory controller negotiates 1.35 V if the platform supports low-voltage operation, otherwise it runs at the standard 1.5 V level.
Will the 240-pin ECC UDIMM fit in a standard server DIMM socket?
Yes, the 240-pin DIMM form factor matches the industry-standard DDR3 UDIMM socket used in compatible servers and workstations; the single-rank 1Rx8 layout does not change the physical keying.
More in ECC Server RAM
Similar items
A-Tech 4GB DDR4 2133 ECC RDIMM 1Rx8 server RAM
- 4 GB
- 288-Pin DDR4 SDRAM
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
A-Tech 4GB DDR4 2666 ECC RDIMM 1Rx8 CL19 1.2V server RAM
- 4 GB
- 288-Pin DDR4 SDRAM
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
A-Tech 8GB DDR3L 1600MHz ECC RDIMM 2Rx4 1.35V Server RAM
- 8 GB
- DDR3L 1600





