A-Tech 4GB DDR3L 1600 ECC UDIMM 2Rx8 1.35V Server RAM
4GB DDR3L 1600 ECC unbuffered DIMM with 2Rx8 rank and 1.35V low voltage for server upgrades
- Total capacity4 GB
- Rated speedDDR3L 1600 (PC3L 12800)
- ChipsetMajor Brand Chipset
- CAS latencyCL11
- Rated voltage1.35 V
- Buffer typeUnbuffered
- ECC protection prevents data corruption in server workloads
- Low 1.35V DDR3L operation reduces power draw
- CL11 latency at 1600MHz delivers responsive performance
- 2Rx8 dual-rank organisation increases memory density
- 240-pin UDIMM form factor fits compatible server boards
A-Tech 4GB DDR3L 1600 ECC UDIMM
This A-Tech module is a 4GB DDR3L 1600 ECC UDIMM built for server and workstation systems. It runs at 1.35V low voltage with a CL11 latency and uses a 2Rx8 unbuffered design. Major-brand chips are fitted to each 240-pin DIMM.
Suits ECC-capable DDR3L platforms only
This memory fits systems that accept DDR3L 1600 ECC unbuffered DIMMs at 1.35V. It will not work in platforms that require registered or load-reduced modules, nor in boards limited to standard 1.5V DDR3 or non-ECC consumer memory.
2Rx8 ECC unbuffered organisation
The single 4GB stick is organised as 2Rx8 with on-die error correction and no register. Verify that your motherboard or server chassis supports this exact rank, voltage and ECC type before ordering.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $19.99
- Cheaper than about 95% of the 6,523 comparable items (median $188.99).
- Total capacity 4 GB
- Lower than about 95% of the 6,064 comparable items (median 32 GB).
- Price per GB $5.00 per GB
- Cheaper than about 73% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 4 GB |
| Performance | |
| Rated speed | DDR3L 1600 (PC3L 12800) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL11 |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.35 V |
Questions about this item
Does my motherboard need a 240-pin DDR3L slot to accept this module?
Yes, this is a 240-pin DDR3L UDIMM, so the board must provide a DDR3L DIMM socket that runs at 1.35 V.
Can I mix this CL11 1600 MHz stick with existing CL9 DDR3L modules?
The system will downclock all modules to the slowest timing, so the CL11 stick will run at CL9 speed if the BIOS allows it.
How do I confirm the ECC function is active after installation?
Enter the BIOS or use an OS tool such as dmidecode and verify that the memory is reported as ECC unbuffered with the correct 4 GB capacity.
More in ECC Server RAM
Similar items
A-Tech 4GB DDR4 2133 ECC RDIMM 1Rx8 server RAM
- 4 GB
- 288-Pin DDR4 SDRAM
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
A-Tech 4GB DDR4 2666 ECC RDIMM 1Rx8 CL19 1.2V server RAM
- 4 GB
- 288-Pin DDR4 SDRAM
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
A-Tech 8GB DDR3L 1600MHz ECC RDIMM 2Rx4 1.35V Server RAM
- 8 GB
- DDR3L 1600





