A-Tech 4GB DDR4 2133MHz ECC UDIMM 1Rx8 Server Memory
A 4 GB DDR4 2133 MHz ECC UDIMM module with CL15 latency and 1.2 V operation for server upgrades
- Total capacity4 GB
- Rated speedDDR4 2133 (PC4 17000)
- ChipsetMajor Brand Chipset
- CAS latencyCL15
- Rated voltage1.2 V
- Buffer typeUnbuffered
- ECC protection guards data integrity with single-bit error correction
- 2133 MHz DDR4 speed delivers responsive server performance
- 2 V operation reduces power draw and heat output
- 288-pin UDIMM form factor fits standard server slots
- 4 GB capacity adds affordable memory headroom for workloads
Compatible Hynix Replacement
This 4GB DDR4 module is built as a direct replacement for Hynix HMA451U7MFR8N-TF. It targets server and workstation systems that require ECC unbuffered memory. Buyers needing registered DIMMs or higher-capacity kits will need a different product.
Thermals And Power Draw
The module operates at the standard DDR4 voltage of 1.20V, keeping power draw low during normal workloads. No active cooling is required on the DIMM itself, so system fan noise remains unaffected.
Testing And Support
Every unit undergoes quality assurance testing for reliable operation in compatible systems. A-Tech provides lifetime warranty coverage and US-based technical support to assist with compatibility verification and installation questions.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $26.99
- Cheaper than about 92% of the 6,523 comparable items (median $188.99).
- Total capacity 4 GB
- Lower than about 95% of the 6,064 comparable items (median 32 GB).
- Price per GB $6.75 per GB
- Cheaper than about 56% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | Compatible Replacement for Hynix |
| Model name | HMA451U7MFR8N-TF |
| Total capacity | 4 GB |
| Performance | |
| Rated speed | DDR4 2133 (PC4 17000) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL15 |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Memory rank | 1Rx8 |
| Power | |
| Rated voltage | 1.2 V |
Questions about this item
How do I install this DDR4 2133MHz ECC UDIMM and what step is often missed?
Align the 288-pin module with the DIMM slot key, press firmly until both retention clips click, then verify the system detects the full 4GB capacity at 2133MHz in BIOS.
What maintenance or replacement will this 1Rx8 server memory need over time?
No scheduled maintenance is required; if errors appear, run a memory diagnostic and replace the module if failures persist beyond the lifetime warranty period.
What limit appears first when this CL15 1.20V module runs under sustained load?
The CAS latency of 15 cycles at 2133MHz sets the timing floor, so throughput plateaus before voltage or thermal limits become a factor.
More in ECC Server RAM
Similar items
Kingston Technology Corp. KVR667D2D8P5/1G 1GB DDR2 667 ECC Registered server RAM
- 1 GB
- DDR2 667
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
Kingston Technology Corp. KVR16R11S8/4I 4GB DDR3 1600 CL11 ECC Registered server RAM
- 4 GB
- DDR3 1600
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
Kingston Technology Corp. KVR667D2S8F5/1G 1GB DDR2 Fully Buffered ECC Server RAM
- 1 GB
- CL5





