A-Tech 4GB DDR4 2400 ECC UDIMM CL17 1Rx8 server RAM
4 GB DDR4 2400 ECC unbuffered UDIMM with CL17 latency and 1.2 V operation
- Total capacity4 GB
- Rated speedDDR4 2400 (PC4 19200)
- ChipsetMajor Brand Chipset
- CAS latencyCL17
- Rated voltage1.2 V
- Buffer typeUnbuffered
- ECC protection prevents data corruption with built-in error correction
- DDR4 2400 MHz speed handles demanding server workloads efficiently
- 2 V standard voltage reduces power consumption and heat
- 288-pin UDIMM form factor fits compatible server motherboards
- 1Rx8 single-rank design optimises memory controller performance
4GB DDR4 2400 ECC UDIMM Server Memory
This A-Tech module delivers 4GB of DDR4 2400 ECC unbuffered memory for server and workstation systems. It operates at CL17 latency with standard 1.20V voltage and uses a 1Rx8 rank configuration on a 288-pin DIMM. The module serves as a compatible replacement for the Kingston KVR24E17S8/4 part number.
Suits ECC UDIMM Slots Only — Not Registered Systems
This memory fits motherboards that accept unbuffered ECC UDIMM modules. It will not work in platforms requiring registered or load-reduced DIMMs. Buyers needing larger single-module capacities or higher frequency ratings should verify their board specifications before purchasing.
DDR4 2400 Speed Decides Compatibility
The module runs at DDR4 2400 (PC4-19200) with CL17 timing. Your system must support this exact speed grade and unbuffered ECC operation for the RAM to function correctly.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $31.99
- Cheaper than about 90% of the 6,523 comparable items (median $188.99).
- Total capacity 4 GB
- Lower than about 95% of the 6,064 comparable items (median 32 GB).
- Price per GB $8.00 per GB
- Pricier than about 57% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | Compatible Replacement for Kingston |
| Model name | KVR24E17S8/4 |
| Total capacity | 4 GB |
| Performance | |
| Rated speed | DDR4 2400 (PC4 19200) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL17 |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Memory rank | 1Rx8 |
| Power | |
| Rated voltage | 1.2 V |
Questions about this item
My motherboard has four DDR4 DIMM slots — will this 288-pin UDIMM fit?
Yes, the module uses the standard 288-pin DDR4 UDIMM form factor and will install in any compatible DDR4 DIMM slot.
Can I mix this ECC unbuffered stick with the non-ECC DDR4 2400 modules already in my workstation?
Mixing ECC and non-ECC memory is not recommended; the system will typically disable ECC and may default to the lowest common speed or fail to boot.
After installing the RAM, how do I confirm the module is running at DDR4 2400 with ECC active?
Enter the BIOS/UEFI or use a tool like CPU-Z on Linux/Windows — verify the speed reads 2400 MT/s, CL17 timings, and ECC status shows enabled.
More in ECC Server RAM
Similar items
Kingston Technology Corp. KVR667D2S8F5/1GI 1GB DDR2 667 ECC Fully Buffered Server RAM
- 1 GB
- DDR2 667
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
Simmtec, Inc 8GB DDR3 1333MHz 240-Pin Server RAM
- 8 GB
- 240-Pin DDR3 SDRAM
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600





