A-Tech 4GB DDR4 2400 PC4-19200E ECC UDIMM 1Rx8 CL17 1.2V 288-Pin Server RAM
4 GB DDR4 ECC UDIMM running at 2400 MHz with CL17 latency for compatible servers and workstations
- CAS latencyCL17
- Memory rank1Rx8
- ECC protection safeguards data integrity in critical workloads
- 2400 MHz DDR4 speed accelerates server responsiveness
- Single-rank 1Rx8 layout optimises memory-channel efficiency
- 2 V operation reduces power draw and heat
- 288-pin UDIMM form factor fits compatible server boards
Server ECC memory upgrade
This 4 GB DDR4 module adds ECC unbuffered memory to compatible servers and workstations. It runs at 2400 MHz with a CL17 latency and operates at the standard 1.2 V. The single-rank 1Rx8 organisation keeps electrical loading low for stable multi-DIMM configurations.
288-pin UDIMM form factor
The 288-pin DIMM fits standard DDR4 UDIMM slots found in qualified server and workstation platforms. ECC circuitry detects and corrects single-bit errors to protect data integrity in critical workloads. Unbuffered design means direct connection to the memory controller without registered buffers. Not compatible with desktop or laptop systems.
Lifetime warranty and US support
A-Tech backs every module with a lifetime warranty and provides complimentary United States based technical support. All units undergo quality assurance testing before shipment to verify reliable operation. Buyers should consult their system manual for correct slot population and channel guidelines.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $30.99
- Cheaper than about 90% of the 6,523 comparable items (median $188.99).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Memory | |
|---|---|
| CAS latency | CL17 |
| Memory rank | 1Rx8 |
Questions about this item
What does PC4-19200 mean for the DDR4-2400 interface on this module?
PC4-19200 is the JEDEC designation for DDR4-2400 and confirms the module is rated for 2400 MT/s data rate with CL17 latency.
What physical slot and keying does this 288-pin ECC UDIMM require?
It requires a standard DDR4 288-pin UDIMM slot; the ECC unbuffered keying prevents insertion into RDIMM or SODIMM sockets.
How do I install this single-rank module and what seating step is often missed?
Align the notch with the slot key, press straight down until both side clips click locked, then verify the module sits flat with no gold contacts visible.
More in ECC Server RAM
Similar items
SK hynix 4GB DDR3 1066 PC3-8500 2Rx4 ECC REG Server Memory HMT151R7BFR4C-H9
- 4 GB
- DDR3 1066
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
SK hynix HMT42GR7AFR4C-RD 16GB DDR3 1866 ECC Registered CL13 1.50V 2Rx4 server RAM
- 16 GB
- DDR3 1866
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
A-Tech 16GB (2x8GB) DDR3L 1600 ECC RDIMM 2Rx4 1.35V Server RAM
- 16 GB (2 × 8 GB)
- DDR3L 1600





