A-Tech 4GB DDR4 2400MHz CL17 ECC RDIMM 1Rx8 Server Memory
A 4GB DDR4 2400MHz ECC registered DIMM with CL17 latency and 1.2V operation for server and workstation upgrades
- Total capacity4 GB
- Rated speedDDR4 2400 (PC4 19200)
- ChipsetMajor Brand Chipset
- CAS latencyCL17
- Rated voltage1.2 V
- Buffer typeRegistered
- ECC protection prevents data errors in servers
- CL17 latency at 2400MHz DDR4 speed
- Registered DIMM design supports stable multi-module configs
- 20V operation reduces power draw and heat
- 288-pin DDR4 form factor fits server motherboards
Server DDR4 ECC RDIMM module
This 4 GB registered DIMM runs at 2400 MHz with CL17 latency and 1.20 V operation. It is built for servers and workstations that require error-correcting memory. The 1Rx8 organisation and 288-pin form factor match the Kingston KVR24R17S8/4 specification. Systems needing registered ECC DDR4 can use this module as a direct replacement.
Standard voltage and registered design
Operating at the DDR4 standard 1.20 V keeps power draw low in normal use. The registered buffer reduces electrical load on the memory controller, which helps stability in multi-module configurations. No special cooling is required beyond typical server airflow. The module meets JEDEC electrical specifications for its speed grade.
Replaces non-ECC or slower DDR4 DIMMs
This module upgrades systems that currently run unbuffered non-ECC memory or lower-speed DDR4 where the platform supports registered ECC. The jump is worth it when data integrity and multi-DIMM stability are required for virtualisation, databases or long-running compute tasks. It is not for desktop boards that lack registered ECC support or for builds needing higher capacity per slot.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $17.99
- Cheaper than about 96% of the 6,523 comparable items (median $188.99).
- Total capacity 4 GB
- Lower than about 95% of the 6,064 comparable items (median 32 GB).
- Price per GB $4.50 per GB
- Cheaper than about 77% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | Compatible Replacement for Kingston |
| Model name | KVR24R17S8/4 |
| Total capacity | 4 GB |
| Performance | |
| Rated speed | DDR4 2400 (PC4 19200) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL17 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx8 |
| Power | |
| Rated voltage | 1.2 V |
Questions about this item
How do I install this 288-pin DDR4 RDIMM, and what step do people often miss?
Align the notch on the module with the slot key, press down firmly until both side clips click shut, and ensure the motherboard is set to 1.2V in BIOS for correct DDR4 voltage.
What maintenance or replacement will this ECC RDIMM need over time?
No routine maintenance is required; the module is tested for lifetime reliability and should only be replaced if system diagnostics report correctable or uncorrectable memory errors.
What limit appears first when this CL17 2400MHz module runs under sustained load?
The CAS latency of 17 cycles at 2400MHz sets the timing floor, so sustained throughput is bounded by the rated DDR4-2400 transfer rate and registered buffer overhead.
More in ECC Server RAM
Similar items
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
A-Tech 4GB DDR4 2400 ECC RDIMM 1Rx8 CL17 1.2V server RAM
- 4 GB
- 288-Pin DDR4 SDRAM
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
A-Tech 4GB DDR3L 1333 ECC UDIMM 2Rx8 1.35V server RAM
- 4 GB
- DDR3L 1333





