Crucial CP16G60C36U5B 16GB DDR5 6000 desktop RAM
- 16 GB
- DDR5 6000
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
4GB DDR4 2400MHz desktop DIMM with CL17 latency and 1.2V operation, compatible with HP 860398-800 and 934799-001
A-Tech 4GB DDR4 2400MHz DIMM replaces HP part numbers 860398-800 and 934799-001. It is a non-ECC unbuffered desktop module rated at PC4-19200 with CL17 latency and 1.20V operation.
The module uses a standard 288-pin DDR4 DIMM form factor. Align the notch with the slot key, press firmly until the retention clips click, and verify the system reports 2400MHz in BIOS. Mismatched speeds or mixing ECC and non-ECC modules are the usual causes of boot failure.
Rated voltage of 1.20V and CL17 timing deliver stable throughput during extended multitasking sessions. The major-brand chipset and quality-assurance testing help maintain consistent bandwidth without throttling when workloads remain high for long periods.
Measured against everything we stock in Desktop RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | Compatible Replacement for HP |
| Model name | 860398-800, 934799-001 |
| Total capacity | 4 GB |
| Performance | |
| Rated speed | DDR4 2400 (PC4 19200) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL17 |
| Tested speed | 2400 |
| ECC support | No |
| Buffer type | Unbuffered |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Recommended for | Compatible Replacement for HP 860398-800, 934799-001 |
Yes, this module is a compatible replacement for HP part numbers 860398-800 and 934799-001. It matches the DDR4 2400MHz PC4-19200 specification, 288-pin DIMM form factor, 1.20V voltage, CL17 latency, and unbuffered non-ECC design required by those systems.
This is a standard 288-pin DDR4 2400MHz UDIMM with 1Rx8 organization. It will install in any desktop DDR4 slot supporting 2400MHz operation. For best stability, match speed, voltage (1.20V), and CAS latency (CL17) with your current modules, or populate all slots with identical sticks.
No, this module operates at the standard DDR4 voltage of 1.20V without a heat spreader. At 2400MHz with CL17 timings in typical desktop workloads, passive airflow inside the case is sufficient. Ensure your chassis has basic front-to-rear ventilation for optimal thermal performance.
More in Desktop RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?