We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

A-Tech

A-Tech 512GB (4x128GB) DDR4 2933 ECC LRDIMM 4Rx4 server RAM

SKU CH-BEKQ-NZ9TY

A 512 GB quad-channel kit of four 128 GB DDR4 2933 ECC LRDIMM modules for servers and workstations

  • Total capacity512 GB (4 × 128 GB)
  • Rated speedDDR4 2933 (PC4 23400)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL21
  • Rated voltage1.2 V
  • Buffer typeLoad Reduced

Capacity 512GB (4 x 128GB)

  • 512GB total capacity across four 128GB modules for high-density server workloads
  • DDR4 2933 speed with CL21 latency delivers fast data throughput for demanding applications
  • ECC Load Reduced DIMM technology corrects errors while reducing electrical load on the memory bus
  • 288-pin DDR4 form factor at standard 1.2V voltage for compatible server and workstation platforms
  • Quad-rank 4Rx4 organisation maximises memory density per channel in supported systems

512 GB quad-channel DDR4 LRDIMM kit

This kit provides 512 GB of DDR4 2933 ECC load-reduced memory in four 128 GB modules. It is built for servers and workstations that require registered LRDIMM modules with 4Rx4 organisation. The quad-channel configuration allows maximum bandwidth on platforms that support four memory channels per processor. Desktop and laptop systems cannot use these modules.

Load-reduced design and ECC

The load-reduced architecture reduces electrical load on the memory bus so that higher-capacity modules can run at 2933 MHz without signal degradation. ECC detects and corrects single-bit errors, protecting data integrity in critical workloads. Each module operates at the standard 1.2 V DDR4 voltage and carries a CAS latency of CL21. No heat spreaders are fitted, so airflow in the chassis must be sufficient for bare modules.

Verify platform support for DDR4 LRDIMM

Confirm that your motherboard and processor officially support DDR4 2933 LRDIMM modules in a 4Rx4 quad-rank configuration. Check the system manual for approved memory population rules, maximum capacity per slot and channel, and any BIOS version requirements. Ensure the board has four available 288-pin DIMM slots wired for quad-channel operation before ordering.

How it compares

Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.

Price $3,792.99
Pricier than about 90% of the 6,523 comparable items (median $188.99).
Total capacity 512 GB (4 × 128 GB)
Higher than about 91% of the 6,064 comparable items (median 32 GB).
Price per GB $7.41 per GB
Typical for this category: the median of 6,064 items is $7.25 per GB.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameA-Tech
Product lineA-Tech DDR4 Server Memory RAM
Model nameA-Tech 512 GB (4 × 128 GB) 4Rx4 PC4-2933Y-L
Part numberNE-SS-0714
Total capacity512 GB (4 × 128 GB)
Product type288-Pin DDR4 SDRAM
Performance
Rated speedDDR4 2933 (PC4 23400)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL21
ECC supportYes
Buffer typeLoad Reduced
Memory rank4Rx4 / 4DRx4
Kit configurationQuad Channel Kit
Heat spreaderNo
Power
Rated voltage1.2 V

Other versions of this model

5 more in the same range

Questions about this item

How do I replace a failed module in the 4x128GB kit?

Each module is a 288-pin DDR4 LRDIMM; remove the faulty stick and insert a matching 128GB 4Rx4 PC4-23400L unit in the same slot, following the server's channel guidelines.

What limits sustained throughput on these 2933 MHz LRDIMMs?

The CL21 latency at 1.20V and the quad-rank 4Rx4 organisation set the practical bandwidth ceiling during continuous workloads.

How much heat and power do four 128GB LRDIMMs generate running all day?

The kit operates at the standard 1.2V DDR4 voltage with no heat spreaders, so thermal output and power draw follow the platform's memory-subsystem design for load-reduced modules.

More in ECC Server RAM

Similar items