A-Tech 64GB (4x16GB) DDR4 3200 ECC UDIMM CL22 1Rx8 1.2V 288-Pin Server RAM
Four 16 GB DDR4 3200 ECC UDIMM modules with CL22 latency, 1Rx8 rank and 1.2 V operation for servers and workstations
- CAS latencyCL22
- Memory rank1Rx8
- 64 GB total capacity across four 16 GB modules for heavy workloads
- DDR4 3200 MHz speed rated at PC4-25600 for fast data throughput
- ECC unbuffered design detects and corrects single-bit errors automatically
- Single-rank 1Rx8 organisation at CL22 latency for efficient memory access
- Standard 1.2 V DDR4 voltage on 288-pin UDIMM form factor
64GB ECC UDIMM kit for servers
This A-Tech kit delivers 64 GB of DDR4 3200 ECC unbuffered memory across four 16 GB modules. It is built for servers and workstations that require error-correcting UDIMMs and is not compatible with desktop or laptop computers.
1.2V standard voltage operation
Each module runs at the DDR4 standard 1.2 V with a CL22 latency and single-rank 1Rx8 organisation. The kit conforms to PC4-25600 specifications for typical server workloads.
Lifetime warranty and US-based support
A-Tech backs every order with a lifetime warranty and provides complimentary United States based technical support before, during and after purchase. All modules undergo quality assurance testing for dependable performance.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $635.99
- Pricier than about 74% of the 6,523 comparable items (median $188.99).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Memory | |
|---|---|
| CAS latency | CL22 |
| Memory rank | 1Rx8 |
Questions about this item
How do I install the four 288-pin UDIMM modules and what step is often missed?
Power off the server, open the chassis, align each module notch with the slot key, press firmly until both retention clips click, then verify in BIOS that all 64 GB are detected at 3200 MHz; the step most often missed is seating every module fully so both clips engage.
What maintenance or replacement will this 1.2 V DDR4 ECC kit need over time?
No scheduled maintenance is required; keep air intakes clean so the modules stay cool, and replace a stick only if the system logs an uncorrectable ECC error or fails to recognise the 16 GB capacity during POST.
What limit appears first when the 1Rx8 CL22 memory runs under sustained heavy load?
The CAS latency of CL22 at 3200 MHz sets the timing ceiling; under continuous bandwidth-heavy workloads the fixed 22-cycle access delay becomes the bottleneck before thermal throttling on these 1.2 V single-rank modules.
More in ECC Server RAM
Similar items
Kingston Technology Corp. KTD-PE564D8-32G 32 GB DDR5-6400 CL52 ECC Registered server RAM
- 32 GB
- DDR5 6400
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
Kingston Technology Corp. KF556R36RB-16 16GB DDR5 5600 CL36 ECC Registered server RAM
- 16 GB
- DDR5 5600
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
Crucial MTA72ASS8G72LZ3G2R2R 64GB DDR4 3200 CL22 4Rx4 288-pin LRDIMM server RAM
- 64 MB
- DDR4 3200





