A-Tech 64GB DDR5 5600 ECC RDIMM 2Rx4 Micron MTC40F2046S1RC56BD2 MTC40F2046S1RC56BG1 Server RAM
64 GB DDR5 5600 ECC registered server module with 2Rx4 Micron chips, CL40 at 1.1 V
- Total capacity64 GB
- Rated speedDDR5 5600 (PC5 44800)
- ChipsetMicron Chipset
- CAS latency40
- Rated voltage1.1 V
- Buffer typeRegistered
- 64GB capacity handles heavy server workloads
- DDR5 5600 speed delivers high data throughput
- ECC RDIMM registered design protects data integrity
- 2Rx4 dual-rank organisation increases memory density
- 1V standard voltage ensures efficient power use
Server Memory Upgrade
This A-Tech 64GB DDR5 5600 ECC RDIMM module is built for server and workstation platforms that require registered memory with error correction. It uses Micron DRAM chips and runs at the standard DDR5 voltage of 1.10V with a CAS latency of 40.
For Registered ECC Systems Only
The module suits administrators expanding capacity in systems that support 2Rx4 registered DIMMs and need 5600 MT/s operation. It will not work in desktop boards that accept only unbuffered non-ECC memory or in laptops that use SODIMM slots.
No Heat Spreader Included
The bare circuit board relies on chassis airflow for cooling, which is typical for dense server configurations where modules sit in directed air paths. No additional software, cables or mounting hardware are bundled with the single stick.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $1,741.99
- Pricier than about 85% of the 6,523 comparable items (median $188.99).
- Total capacity 64 GB
- Higher than about 70% of the 6,064 comparable items (median 32 GB).
- CAS latency 40
- Typical for this category: the median of 439 items is 40.
- Price per GB $27.22 per GB
- Pricier than about 89% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | Compatible Replacement for Micron MTC40F2046S1RC56BD2 MTC40F2046S1RC56BG1 |
| Model name | A-Tech 64 GB DDR5-5600 ECC RDIMM Server RAM Module |
| Total capacity | 64 GB |
| Product type | 288-Pin DDR5 RDIMM |
| Performance | |
| Rated speed | DDR5 5600 (PC5 44800) |
| Processor | |
| Chipset | Micron Chipset |
| Memory | |
| CAS latency | 40 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.1 V |
Questions about this item
Does my server need a DDR5 RDIMM slot to accept this 288-pin module?
Yes, the module is a 288-pin DDR5 RDIMM and requires a server or workstation motherboard with DDR5 registered DIMM slots.
Will this 5600 MT/s ECC RDIMM downclock to match older DDR5 4800 modules I keep installed?
The module runs at 5600 MT/s; if mixed with slower DDR5 modules the system will typically operate all memory at the lowest common speed.
How can I confirm the 64 GB module is running at 5600 MT/s with ECC active after installation?
Check the BIOS memory information or use a tool such as dmidecode to verify speed shows 5600 MT/s and ECC status reports as enabled.
More in ECC Server RAM
Similar items
A-Tech 64GB DDR5 4800 ECC RDIMM 2Rx4 HP N20162-001 P43333-1A1 P50312-B21 P56153-001 Server Memory
- 64 GB
- DDR5 4800
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
A-Tech 64GB DDR5 5600 ECC RDIMM 2Rx4 Server Memory
- 64 GB
- DDR5 5600
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600





