A-Tech 4GB (2x2GB) DDR3 1333MHz Desktop RAM
- 4 GB (2 × 2 GB)
- 240-Pin PC RAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Dual-channel 8 GB DDR3 kit running at 1066 MHz with CL7 timing and 1.5 V for compatible desktop systems
Capacity 8GB (2 x 4GB)
Speed DDR3 1066 (PC3 8500)
This kit delivers eight gigabytes of DDR3 memory across two unbuffered 4GB modules. It is intended for desktop systems that accept 240-pin DIMMs running at the PC3-8500 standard. The 1.5V operating voltage matches the baseline specification for DDR3 desktop memory.
The modules are tested at 1066MHz with a CAS latency of 7, which defines the practical throughput limit of the DDR3 1066 interface. Systems that only support lower DDR3 speeds will downclock the kit automatically, while boards rated for higher DDR3 frequencies cannot push these modules past their validated 1066MHz rating.
Eight gigabytes provides comfortable headroom for everyday multitasking, office suites and light content creation on DDR3-era platforms. Workloads that regularly exceed 8GB — such as large virtual-machine sets, heavy video timelines or modern AAA titles — will encounter paging and require a platform upgrade rather than a simple module swap.
Measured against everything we stock in Desktop RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | A-Tech DDR3 Desktop Memory RAM |
| Model name | A-Tech 8 GB Kit (2 × 4 GB) PC3-8500 Desktop RAM |
| Part number | NE-SS-0652 |
| Total capacity | 8 GB (2 × 4 GB) |
| Product type | 240-Pin PC RAM |
| Performance | |
| Rated speed | DDR3 1066 (PC3 8500) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| Tested speed | 1066 |
| Tested timing | 7 |
| ECC support | No |
| Buffer type | Unbuffered |
| Kit configuration | Dual Channel Kit |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.5 V |
| Compatibility | |
| Recommended for | AMD & Intel Compatible |
Other versions of this model
Yes, the kit is DDR3 DIMM memory designed for desktop computers that support DDR3 1066 MHz modules.
The modules are tested at 1066 MHz with CL7 timing at 1.5 V; most boards will apply these settings automatically on boot.
You can, provided the board supports mixed capacities and the total does not exceed its maximum; all modules will run at the slowest common speed.
More in Desktop RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?