A-Tech 8GB DDR3 1333 ECC RDIMM 2Rx8 1.5V Server RAM
An 8 GB DDR3 registered ECC module running at 1333 MHz with CL9 latency and 1.5 V for server workloads
- Total capacity8 GB
- Rated speedDDR3 1333 (PC3 10600)
- ChipsetMajor Brand Chipset
- CAS latencyCL9
- Rated voltage1.5 V
- Buffer typeRegistered
- 8GB capacity handles larger server workloads
- DDR3 1333MHz speed matches PC3-10600 spec
- ECC registered design corrects data errors automatically
- 2Rx8 dual-rank organisation for dense memory configs
- 5V standard voltage fits DDR3 server slots
8GB DDR3 ECC RDIMM
This 8GB registered DIMM uses DDR3 1333 memory with ECC error correction for server and workstation systems. It runs at the standard 1.5V voltage and presents a 2Rx8 rank configuration on a 240-pin interface. The module is built with major brand chips and tested for reliable operation in compatible platforms.
Replaces Kingston KVR13E9/8HM
The stick is a direct equivalent for the Kingston KVR13E9/8HM part number, matching its DDR3 1333 speed, ECC RDIMM type and 1.5V rating. The upgrade is worth it when a system requires registered memory with error correction and the board has free 240-pin slots that support DDR3 1333 PC3-10600 modules.
Fits DDR3 registered DIMM slots
Installation requires a motherboard that accepts DDR3 ECC RDIMM modules at 1333 MT/s and supplies 1.5V to the 240-pin sockets. The single 8GB module leaves additional slots open for further capacity expansion while the registered buffer reduces electrical load on the memory controller.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $29.99
- Cheaper than about 90% of the 6,523 comparable items (median $188.99).
- Total capacity 8 GB
- Lower than about 80% of the 6,064 comparable items (median 32 GB).
- Price per GB $3.75 per GB
- Cheaper than about 83% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR3 1333 (PC3 10600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.5 V |
Questions about this item
Will this 240-pin DDR3 DIMM fit my server's registered memory slots?
Yes, the module is a 240-pin DDR3 RDIMM designed for server and workstation systems that accept registered ECC memory.
What is the correct way to seat this registered ECC module so the system recognises the full 8 GB?
Align the notch with the slot key, press firmly until both side clips click, and verify in BIOS that the memory runs at 1333 MHz with ECC active.
When should I plan to replace this 1.5 V DDR3 RDIMM in a 24/7 server?
DDR3 registered ECC modules typically run for many years; replace if memory diagnostics report correctable errors increasing over time or after a major platform upgrade.
More in ECC Server RAM
Similar items
Kingston Technology Corp. KCP432SD816 16GB DDR4 3200MHz CL22 1.2V 260-pin SoDIMM server RAM
- 16 GB
- Green
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
Kingston Technology Corp. KVR400D2D8R3/1G 1GB DDR2 400 (PC2 3200) ECC Registered server RAM
- 1 GB
- DDR2 400
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
Simmtec, Inc DDR3L 1600MHz ECC 8GB Server Memory 240-Pin
- 8 GB
- 240-Pin DDR3 SDRAM





