We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 240-pin DDR3 DIMM with silver heatsink and black chips

A-Tech

A-Tech 8GB DDR3 1333MHz PC3-10600 ECC RDIMM 2Rx4 Server RAM

SKU CH-RTEV-98X7T

8GB DDR3 1333MHz ECC registered DIMM for server upgrades with 2Rx4 organisation

  • Total capacity8 GB
  • Rated speedDDR3 1333 (PC3 10600)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL9
  • Rated voltage1.5 V
  • Buffer typeRegistered
  • ECC protection prevents data corruption with registered 2Rx4 design
  • 1333 MHz DDR3 speed handles server workloads at 1.50V
  • 8 GB capacity on a single 240-pin module simplifies upgrades
  • Tested with major-brand chips for dependable operation
  • Direct replacement for listed Kingston server part numbers

8GB DDR3 1333MHz ECC RDIMM Server Module

This 8GB registered DIMM uses DDR3 technology at 1333MHz with CL9 latency and 1.5V operation. It is built for servers and workstations that require error-correcting memory to maintain data integrity under continuous workloads. The 2Rx4 organisation and 240-pin form factor fit standard DDR3 RDIMM slots in compatible enterprise platforms.

Major-brand chipset and chips ensure validated

Modules are assembled with major-brand components and tested to meet stringent quality standards for dependable operation in multi-socket environments. ECC and registered buffering reduce electrical load on the memory controller, allowing larger memory populations without signal degradation. This combination supports stable performance in virtualisation, database and compute-cluster deployments.

Registered ECC RDIMM dictates platform compatibility

The registered ECC RDIMM design only works in motherboards and chipsets that explicitly support registered, error-correcting DDR3 modules. Consumer desktop boards and laptops that accept only unbuffered non-ECC DIMMs cannot use this memory. Verify your system documentation for DDR3 RDIMM support before purchasing.

How it compares

Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.

Price $28.99
Cheaper than about 91% of the 6,523 comparable items (median $188.99).
Total capacity 8 GB
Lower than about 80% of the 6,064 comparable items (median 32 GB).
Price per GB $3.62 per GB
Cheaper than about 84% of the 6,064 comparable items (median $7.25 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameA-Tech
Total capacity8 GB
Performance
Rated speedDDR3 1333 (PC3 10600)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL9
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Power
Rated voltage1.5 V

Questions about this item

Will the 240-pin DDR3 DIMM slots or the registered ECC chips on this 8 GB module wear out and need replacement?

DDR3 registered ECC modules are solid-state with no moving parts; the 240-pin edge connector and major-brand chips are rated for the life of the server, so no scheduled replacement is required.

What limit appears first when this CL9 1333 MHz registered DIMM runs at full load continuously?

The memory controller’s maximum sustained bandwidth at PC3-10600 speed and the 1.5 V thermal envelope are reached before the module itself throttles.

How much heat and power does a single 1.5 V 8 GB 2Rx4 registered stick add to a chassis running 24/7?

At 1.5 V the module draws only a few watts, adding minimal heat that standard server airflow handles without extra cooling.

More in ECC Server RAM

Similar items