A-Tech 8GB DDR3 1600MHz ECC RDIMM 2Rx4 Supermicro Certified
8GB DDR3 1600MHz ECC registered DIMM, dual-rank Samsung chips, Supermicro certified
- Total capacity8 GB
- Rated speedDDR3 1600 (PC3 12800)
- ChipsetSamsung Chipset
- CAS latencyCL11
- Rated voltage1.5 V
- Buffer typeRegistered
- ECC protection guards data integrity with registered DDR3 technology
- 1600 MHz speed handles demanding server workloads efficiently
- Dual-rank 2Rx4 organisation maximises memory density per slot
- Samsung chipset ensures reliable component quality throughout
- Supermicro certification confirms validated compatibility with qualified systems
8GB DDR3 1600MHz ECC RDIMM
This 8GB registered DIMM uses Samsung chips and runs at DDR3 1600MHz with CL11 latency. It is certified for Supermicro systems and carries the MEM-DR380L-SL01-ER16 part number. The module is built for servers and workstations that require error-correcting registered memory.
Thermals noise and power draw
Operating at the standard 1.5V DDR3 voltage, the module draws typical power for an 8GB registered stick. Passive cooling through the server chassis airflow keeps temperatures within normal limits. No active cooling or additional fan noise is introduced by the memory itself.
Sustained load behaviour
The dual-rank 2Rx4 organisation helps maintain bandwidth during extended workloads. ECC registration adds a clock cycle of buffering, which stabilises the signal under continuous read and write cycles. The module is tested for reliable operation in 24/7 server environments.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $15.99
- Cheaper than about 97% of the 6,523 comparable items (median $188.99).
- Total capacity 8 GB
- Lower than about 80% of the 6,064 comparable items (median 32 GB).
- Price per GB $2.00 per GB
- Cheaper than about 93% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | SuperMicro |
| Product line | Supermicro Certified |
| Model name | MEM-DR380L-SL01-ER16 |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR3 1600 (PC3 12800) |
| Processor | |
| Chipset | Samsung Chipset |
| Memory | |
| CAS latency | CL11 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.5 V |
Questions about this item
How do I install this 240-pin DDR3 RDIMM in a Supermicro server and which step is often missed?
Power down the server, open the chassis, align the module key notch with the slot, press firmly until both retention clips click, then verify the system BIOS reports the full 8 GB at 1600 MHz; the step often missed is enabling ECC in the BIOS after the physical install.
What maintenance or replacement will this Samsung ECC RDIMM need over its service life?
No scheduled maintenance is required; the module is tested for lifetime reliability, so replacement is only needed if a memory diagnostic reports uncorrectable ECC errors or the server fails to POST with the DIMM seated.
What is the first limit reached when this CL11 1.50 V registered DIMM runs sustained workloads?
The thermal and voltage envelope of DDR3 at 1.50 V and CL11 latency defines the sustained performance ceiling; the registered buffer adds minor latency but prevents signal degradation, so the memory controller’s maximum supported bandwidth at 1600 MHz is the limiting factor.
More in ECC Server RAM
Similar items
HP 345113-551 1 GB DDR2 ECC Registered 400 MHz PC2-23200 CL3 DIMM
- DDR2 SDRAM
- ECC
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
Simmtec, Inc 2GB PC3-10600U DDR3 server RAM MT8JTF25664AZ-1G4H1
- 2 GB
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
Simmtec, Inc 4GB 1600MHz DDR3 PC3-12800 ECC Reg CL11 DIMM SR x8 Server Memory
- 4 GB
- 240-Pin DDR3 SDRAM





