A-Tech 8GB DDR3 1600MHz ECC RDIMM 2Rx8 Server Memory
ECC registered DDR3 DIMM with 8 GB capacity, 1600 MHz speed and CL11 latency for server workloads
- Total capacity8 GB
- Rated speedDDR3 1600 (PC3 12800)
- ChipsetMajor Brand Chipset
- CAS latencyCL11
- Rated voltage1.5 V
- Buffer typeRegistered
- 8GB capacity expands server memory headroom
- DDR3 1600MHz PC3-12800 speed supports demanding workloads
- ECC RDIMM registered design protects data integrity
- 2Rx8 dual-rank organisation increases memory density
- 50V standard voltage ensures broad platform compatibility
8GB DDR3 1600MHz ECC RDIMM Server Memory
This 8GB DDR3 module runs at 1600MHz with CL11 latency and 1.5V operation. It uses a 240-pin DIMM form factor and features ECC registered 2Rx8 architecture for server reliability.
Suits servers and workstations needing registered
Systems that require unbuffered non-ECC DDR3 or a different DDR generation cannot use this module. Buyers without a compatible 240-pin registered memory slot should look elsewhere.
Registered ECC 2Rx8 configuration decides
The module is a registered ECC DIMM with 2Rx8 organisation, so the motherboard must support registered error-correcting memory. Verify your platform accepts this exact configuration before ordering.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $28.99
- Cheaper than about 91% of the 6,523 comparable items (median $188.99).
- Total capacity 8 GB
- Lower than about 80% of the 6,064 comparable items (median 32 GB).
- Price per GB $3.62 per GB
- Cheaper than about 84% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR3 1600 (PC3 12800) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL11 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.5 V |
Questions about this item
How do I install this 240-pin DDR3 ECC RDIMM and what step is often missed?
Power off the server, open the chassis, align the notch on the 240-pin module with the slot key, press firmly until both retention clips click, then power on and verify the full 8 GB appears in BIOS or system firmware.
What maintenance or replacement will this registered ECC module need over its service life?
No routine maintenance is required; the module either continues operating or develops correctable/uncorrectable errors that the platform logs, at which point the 8 GB stick is replaced as a unit.
What limit appears first when this CL11 1.50 V DDR3-1600 kit runs sustained workloads?
The memory controller's maximum supported frequency and voltage ceiling — 1600 MT/s at 1.50 V — caps throughput before the module's own timing or thermal limits are reached.
More in ECC Server RAM
Similar items
SK hynix HMT31GR7BFR4A-H9 8GB DDR3 1333 ECC Registered Server RAM
- 8 GB
- DDR3 1333
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
A-Tech 16GB (2x8GB) DDR3L 1600 ECC RDIMM 1Rx4 1.35V 240-Pin Server RAM
- 16 GB (2 × 8 GB)
- DDR3L 1600
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
A-Tech 8GB (2x4GB) DDR3 1866 ECC UDIMM 1Rx8 1.5V server RAM
- 8 GB (2 × 4 GB)
- DDR3 1866





