A-Tech 8GB DDR3 1866 ECC RDIMM 2Rx4 Server RAM
8GB DDR3 1866MHz ECC registered DIMM, 2Rx4, replaces Samsung M393B1K70DH0-CMA, M393B1K70EB0-CMA, M393B1K70QB0-CMA
- Total capacity8 GB
- Rated speedDDR3 1866 (PC3 14900)
- ChipsetMajor Brand Chipset
- CAS latencyCL13
- Rated voltage1.5 V
- Buffer typeRegistered
- 8GB capacity expands server memory for heavier workloads
- DDR3 1866 MHz speed accelerates data throughput
- ECC registered design detects and corrects memory errors
- CL13 latency at 1.5V delivers efficient timing
- 240-pin DIMM form factor fits standard DDR3 server slots
Product identity
This is an 8GB DDR3 1866 MHz registered ECC DIMM built for server and workstation platforms. The module runs at PC3-14900 speed with CL13 latency and standard 1.50 V operation. A 2Rx4 organisation and major-brand chips provide the density and signal integrity expected in multi-socket environments.
Fit and alternatives
It suits administrators upgrading or repairing systems that require registered DDR3 ECC memory in a 240-pin form factor. Buyers whose platforms need unbuffered UDIMMs, higher capacities per module, or a newer DDR generation should look elsewhere.
Deciding specification
The registered ECC design with 2Rx4 ranking is the single attribute that determines whether this module will be accepted by the target system; the memory controller must explicitly support registered operation and this rank configuration.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $28.99
- Cheaper than about 91% of the 6,523 comparable items (median $188.99).
- Total capacity 8 GB
- Lower than about 80% of the 6,064 comparable items (median 32 GB).
- Price per GB $3.62 per GB
- Cheaper than about 84% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR3 1866 (PC3 14900) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL13 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.5 V |
Questions about this item
How much heat and power does this 1.50 V DDR3 1866 RDIMM generate under continuous load?
The module runs at standard 1.50 V DDR3 voltage, so power draw and heat stay within normal DDR3 limits for a registered DIMM; typical server airflow is sufficient for all-day operation.
What motherboard slot and chipset support are required to run this 240-pin ECC RDIMM?
You need a server or workstation board with DDR3 240-pin RDIMM slots, registered ECC support, and a memory controller qualified for 1866 MHz PC3-14900 modules.
Can this 2Rx4 CL13 module share channels with older 1Rx8 DDR3 DIMMs in the same server?
Mixing ranks and organisations is possible only if the platform’s memory controller explicitly supports mixed-rank populations; otherwise the system may down-clock or fail to post.
More in ECC Server RAM
Similar items
SK hynix HMT31GR7BFR4A-H9 8GB DDR3 1333 ECC Registered Server RAM
- 8 GB
- DDR3 1333
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
A-Tech 16GB (2x8GB) DDR3L 1600 ECC RDIMM 1Rx4 1.35V 240-Pin Server RAM
- 16 GB (2 × 8 GB)
- DDR3L 1600
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
A-Tech 8GB (2x4GB) DDR3 1866 ECC UDIMM 1Rx8 1.5V server RAM
- 8 GB (2 × 4 GB)
- DDR3 1866





