A-Tech 8GB DDR3L 1066MHz ECC RDIMM 4Rx8 1.35V Server RAM
8GB DDR3L 1066MHz ECC registered server memory module with 4Rx8 organisation and 1.35V operation
- Total capacity8 GB
- Rated speedDDR3L 1066 (PC3L 8500)
- ChipsetMicron Chipset
- CAS latencyCL3
- Rated voltage1.35 V
- Buffer typeRegistered
- 8GB capacity expands server memory for heavier workloads
- DDR3L 1066MHz speed delivers PC3-8500 bandwidth for responsive operation
- ECC registered design detects and corrects data errors automatically
- 35V low-voltage DDR3L reduces power draw and heat output
- 4Rx8 240-pin RDIMM form factor fits compatible DDR3L server slots
Capacity and form factor
This is an 8GB DDR3L registered DIMM built for server and workstation platforms that require error-correcting memory. The module runs at 1066MHz with a CAS latency of CL3 and operates at 1.35V low voltage. It uses a 4Rx8 organisation on a 240-pin interface.
Compatibility fit
It suits administrators upgrading or repairing systems qualified for the Micron MT36KSF1G72PDZ-1G1M1 part number. Builders needing unbuffered UDIMMs, higher frequencies, larger single-module capacities, or non-ECC memory should look elsewhere.
Sustained operation
Registered buffering and ECC correction maintain data integrity during continuous multi-threaded workloads. The low-voltage design reduces power draw and heat output when the module is populated across multiple slots for extended periods.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $15.99
- Cheaper than about 97% of the 6,523 comparable items (median $188.99).
- Total capacity 8 GB
- Lower than about 80% of the 6,064 comparable items (median 32 GB).
- Price per GB $2.00 per GB
- Cheaper than about 93% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | Compatible Replacement for Micron |
| Model name | MT36KSF1G72PDZ-1G1M1 |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR3L 1066 (PC3L 8500) |
| Processor | |
| Chipset | Micron Chipset |
| Memory | |
| CAS latency | CL3 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 4Rx8 |
| Power | |
| Rated voltage | 1.35 V |
Questions about this item
Will my motherboard need to support 240-pin DDR3L RDIMMs at 1.35V for this module to work?
Yes — this is a 240-pin DDR3L registered DIMM that runs at 1.35V, so the board must accept DDR3L RDIMMs at that voltage and pin count.
Can I mix this 4Rx8 registered ECC module with older unbuffered non-ECC DIMMs in the same server?
No — registered ECC RDIMMs cannot be mixed with unbuffered non-ECC memory; the memory controller requires all slots to use the same registered ECC type.
How can I confirm the module is running at 1066MHz with ECC active after installation?
Check the BIOS memory information or use a tool like dmidecode to verify the speed shows 1066MHz, the type is DDR3L, and ECC status reads enabled.
More in ECC Server RAM
Similar items
HP 345113-551 1 GB DDR2 ECC Registered 400 MHz PC2-23200 CL3 DIMM
- DDR2 SDRAM
- ECC
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
Simmtec, Inc 2GB PC3-10600U DDR3 server RAM MT8JTF25664AZ-1G4H1
- 2 GB
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
Simmtec, Inc 4GB 1600MHz DDR3 PC3-12800 ECC Reg CL11 DIMM SR x8 Server Memory
- 4 GB
- 240-Pin DDR3 SDRAM





