A-Tech 8GB DDR3L 1333MHz ECC RDIMM 2Rx4 Server RAM
8GB DDR3L 1333MHz ECC registered server memory module with 1.35V low voltage operation
- Total capacity8 GB
- Rated speedDDR3L 1333 (PC3L 10600)
- ChipsetMajor Brand Chipset
- CAS latencyCL9
- Rated voltage1.35 V
- Buffer typeRegistered
- 8GB DDR3L 1333MHz capacity handles demanding server workloads
- ECC registered design protects data integrity in critical applications
- 35V low-voltage operation reduces power draw and heat
- 240-pin 2Rx4 form factor fits compatible HP server slots
- Compatible replacement for HP part numbers including 647650-071 and 500662-B21
8GB DDR3L 1333MHz ECC Registered Server Module
This single 8GB DDR3L module runs at 1333MHz with CL9 latency and 1.35V operation. It uses a 240-pin DIMM form factor and includes ECC with registered buffering for error correction and signal stability in server platforms.
Suited for HP systems referencing the listed part
The module matches HP part numbers including 500662, 604502, 604506, 606425, 606427, 647650, 647877 and 647897. It is not for desktop boards that require unbuffered non-ECC memory or for platforms that only support higher-voltage DDR3 at 1.5V.
Fits 240-pin DDR3 slots
The registered design places a register between the DRAM and the memory controller, reducing electrical load on the bus. This frees the platform to populate more slots per channel while the low 1.35V draws less power than standard DDR3.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $29.99
- Cheaper than about 90% of the 6,523 comparable items (median $188.99).
- Total capacity 8 GB
- Lower than about 80% of the 6,064 comparable items (median 32 GB).
- Price per GB $3.75 per GB
- Cheaper than about 83% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR3L 1333 (PC3L 10600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.35 V |
Questions about this item
What server slot and voltage must my system provide for this DDR3L 1333 MHz 1.35 V 240-pin RDIMM to operate?
Your server needs a DDR3 240-pin DIMM slot that supplies 1.35 V and supports registered ECC modules at 1333 MHz.
Will this 2Rx4 CL9 registered ECC module run with my existing 1Rx8 CL9 DDR3L RDIMMs in the same channel?
Mixing 2Rx4 and 1Rx8 registered ECC DIMMs is often supported but depends on the server BIOS; populate identical ranks per channel for best stability.
How can I confirm the module is detected at DDR3-1333 CL9 with ECC active after installation?
Check the BIOS memory information or run a tool such as dmidecode or CPU-Z to verify speed 1333 MT/s, CAS 9, and ECC enabled.
More in ECC Server RAM
Similar items
Kingston Technology Corp. KCP432SD816 16GB DDR4 3200MHz CL22 1.2V 260-pin SoDIMM server RAM
- 16 GB
- Green
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
Kingston Technology Corp. KVR400D2D8R3/1G 1GB DDR2 400 (PC2 3200) ECC Registered server RAM
- 1 GB
- DDR2 400
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
Simmtec, Inc DDR3L 1600MHz ECC 8GB Server Memory 240-Pin
- 8 GB
- 240-Pin DDR3 SDRAM





