A-Tech 8GB DDR3L 1600 ECC RDIMM 2Rx4 server RAM
8GB DDR3L 1600 ECC RDIMM 2Rx4 at 1.35V for server and workstation upgrades
- Total capacity8 GB
- Rated speedDDR3L 1600 (PC3L 12800)
- ChipsetMajor Brand Chipset
- CAS latencyCL11
- Rated voltage1.35 V
- Buffer typeRegistered
- 8GB capacity expands server multitasking headroom
- DDR3L 1600MHz speed accelerates data throughput
- ECC registered design protects critical workload integrity
- 35V low voltage reduces platform power draw
- 240-pin DIMM fits standard DDR3L server slots
A-Tech 8GB DDR3L 1600 ECC RDIMM 2Rx4
This 8GB DDR3L 1600 module is a registered ECC DIMM built for server and workstation systems that require error-correcting memory. It runs at 1.35V low voltage with CL11 latency and a 2Rx4 organisation. The 240-pin form factor fits standard DDR3 server slots.
Suits maintainers replacing Hynix HMT31GR7CFR4A-PB
Administrators upgrading compatible platforms with validated DDR3L registered ECC memory will find this a direct match. Systems that need unbuffered DIMMs, higher frequencies, or non-ECC modules cannot use this part.
Registered ECC with 2Rx4 organisation
The module combines ECC error correction and register buffering in a dual-rank x4 configuration. This specific organisation is required by many server memory controllers for stable operation at full population.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $31.99
- Cheaper than about 90% of the 6,523 comparable items (median $188.99).
- Total capacity 8 GB
- Lower than about 80% of the 6,064 comparable items (median 32 GB).
- Price per GB $4.00 per GB
- Cheaper than about 81% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR3L 1600 (PC3L 12800) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL11 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.35 V |
Questions about this item
Does the CL11 latency at 1600 MHz create a bottleneck during sustained server workloads?
CL11 is the rated latency for this DDR3L 1600 module; the registered buffer and ECC logic add a cycle, but the limit under sustained use is the memory controller's maximum supported frequency and rank population rules, not the CAS figure alone.
How much heat and power does an 8 GB 1.35 V registered DIMM produce when running 24/7?
At 1.35 V the DDR3L module draws less power than standard 1.5 V DDR3, reducing heat output; the registered driver adds slight consumption, but total thermal load stays within normal server DIMM limits for continuous operation.
What motherboard slot and chipset support are required for this 240-pin DDR3L ECC RDIMM to function?
A 240-pin DDR3 DIMM slot wired for registered ECC memory and a chipset or CPU memory controller that validates DDR3L 1.35 V 2Rx4 modules are required; consumer boards without registered-ECC support will not post.
More in ECC Server RAM
Similar items
Kingston Technology Corp. KVR667D2S8F5/1GI 1GB DDR2 667 ECC Fully Buffered Server RAM
- 1 GB
- DDR2 667
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
Simmtec, Inc 8GB DDR3 1333MHz 240-Pin Server RAM
- 8 GB
- 240-Pin DDR3 SDRAM
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600





