A-Tech 8GB DDR4 2133 ECC UDIMM 2Rx8 CL15 1.2V 288-Pin server RAM
8 GB DDR4 2133 MHz ECC UDIMM with CL15 latency, dual-rank x8 organisation and 1.2 V operation for servers and workstations
- CAS latencyCL15
- Memory rank2Rx8
- ECC protection prevents data corruption in critical workloads
- CL15 latency at 2133 MHz DDR4 speed
- Dual-rank 2Rx8 organisation increases memory density per slot
- Standard 1.2 V DDR4 voltage reduces power draw
- 288-pin UDIMM form factor fits compatible server and workstation boards
8GB DDR4 ECC UDIMM for servers and workstations
This 8GB DDR4 module runs at 2133 MHz with CL15 latency and 1.2V operation. It is built as a 2Rx8 dual-rank unbuffered DIMM with 288 pins for server and workstation platforms that require ECC memory. Desktop and laptop systems are not supported.
Straightforward DIMM installation
The module seats in a standard 288-pin DDR4 slot and requires no special tools or configuration beyond the system memory seating and channel guidelines in the server or workstation manual. Problems usually arise when the platform does not support ECC unbuffered memory or when population rules for dual-rank modules are ignored.
Verify ECC unbuffered DDR4 support before ordering
Check the system documentation to confirm the platform accepts DDR4 ECC UDIMM modules at 2133 MHz and can address 2Rx8 dual-rank sticks. Ensure the memory channel layout matches the module rank configuration and that the BIOS or firmware is current enough to recognise the module.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $80.99
- Cheaper than about 75% of the 6,523 comparable items (median $188.99).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Memory | |
|---|---|
| CAS latency | CL15 |
| Memory rank | 2Rx8 |
Questions about this item
How can I confirm the module is running at CL15 after installation?
Check the BIOS memory timing table or a tool such as CPU-Z; the SPD should show CAS 15 at 2133 MHz.
What comes in the package and what must I source separately?
The box contains one 8 GB DDR4 2133 MHz ECC UDIMM 288-Pin module; no cables, brackets or additional parts are included.
Which capacity and rank should I choose for a dual-channel server board?
Select the 8 GB 2Rx8 module and populate matching slots per the motherboard manual to enable dual-channel operation.
More in ECC Server RAM
Similar items
Kingston Technology Corp. KTL-TS432D8P/16G 16GB DDR4 3200MHz CL22 1.2V ECC Registered 2Rx8 server RAM
- 16 GB
- DDR4 3200
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
Brute Networks 8GB DDR4 2666 1Rx8 Registered ECC server RAM
- 8 GB
- DDR4 2666
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
Brute Networks 8GB DDR4-2133 ECC Registered RDIMM 2Rx8 1.2V CL15 288-Pin
- 8 GB
- DDR4 2133





