Crucial CP16G60C36U5B 16GB DDR5 6000 desktop RAM
- 16 GB
- DDR5 6000
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
8GB DDR4 2133MHz CL15 desktop module replaces Samsung M378A1K43BB1-CPBD0 with 1.2V unbuffered operation
This 8GB DDR4 module runs at 2133MHz with CL15 latency and 1.2V operation. It is built as a compatible replacement for the Samsung M378A1K43BB1-CPBD0 part number. The unbuffered, non-ECC DIMM targets desktop users who need a direct swap for that specific Samsung stick.
The stick uses a standard 288-pin DDR4 DIMM layout, noted as 262-pin in the supplier data, and carries Samsung chipset components. No heat spreader is fitted, keeping the profile low for tight slots. Every unit passes A-Tech quality assurance testing before it ships.
Installation follows the usual desktop DIMM procedure: align the notch, press until the latches click, and verify the system POSTs at 2133MHz. The most frequent issue is a motherboard that defaults to a lower speed or fails to train when the slot population changes. Checking the manual for supported frequencies and seating the module firmly resolves most problems.
Measured against everything we stock in Desktop RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Product line | Compatible Replacement for Samsung |
| Model name | M378A1K43BB1-CPBD0 |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR4 2133 (PC4 17000) |
| Processor | |
| Chipset | Samsung Chipset |
| Memory | |
| CAS latency | CL15 |
| Tested speed | 2133 |
| ECC support | No |
| Buffer type | Unbuffered |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Recommended for | Compatible Replacement for Samsung M378A1K43BB1-CPBD0 |
No heat spreader is fitted and the 1.20V DDR4 design runs within JEDEC thermal limits, so no aftermarket cooling is required.
The 2133 MT/s data rate is the hard ceiling; CL15 only adds a few nanoseconds per access and does not limit peak bandwidth.
At 1.20V the module typically draws 2–3 watts, producing minimal heat and negligible fan noise inside a desktop chassis.
More in Desktop RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?