A-Tech 8GB DDR4 2400 ECC RDIMM 1Rx8 CL17 1.2V Server Memory
8GB DDR4 2400 ECC registered DIMM with CL17 latency for server upgrades
- Total capacity8 GB
- Rated speedDDR4 2400 (PC4 19200)
- ChipsetMajor Brand Chipset
- CAS latencyCL17
- Rated voltage1.2 V
- Buffer typeRegistered
- ECC protection prevents data corruption with registered DDR4 design
- 2400 MHz speed handles demanding server workloads efficiently
- 2V operation reduces power consumption in dense configurations
- Single-rank 1Rx8 layout maximises compatibility across Dell platforms
- 288-pin DDR4 form factor fits standard server memory slots
8GB DDR4 2400 ECC RDIMM
This single 8GB registered DIMM adds error-correcting memory to compatible Dell servers and workstations. It targets administrators who need to expand capacity in systems that require registered modules with ECC support.
288-pin registered design with major-brand chips
The module uses a standard 288-pin DDR4 DIMM form factor and operates at 1.2V. Registered signalling reduces electrical load on the memory controller, while the 1Rx8 organisation and CL17 latency provide stable throughput for 2400MHz server platforms.
Replaces non-ECC or lower-capacity DDR4 DIMMs
The upgrade is worthwhile when the platform demands registered ECC memory and the current configuration lacks error correction or has free DIMM slots. Systems limited to unbuffered memory or speeds below 2400MHz cannot use this module.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $50.99
- Cheaper than about 84% of the 6,523 comparable items (median $188.99).
- Total capacity 8 GB
- Lower than about 80% of the 6,064 comparable items (median 32 GB).
- Price per GB $6.37 per GB
- Cheaper than about 60% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR4 2400 (PC4 19200) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL17 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx8 |
| Power | |
| Rated voltage | 1.2 V |
Questions about this item
What speed does the DDR4 2400 interface actually run at in a server?
The module operates at 2400 MHz, delivering a PC4-19200 data rate when the platform supports that speed.
What physical slot and pin count does this 288-pin RDIMM require?
It fits a standard DDR4 DIMM socket with 288 pins; the registered design adds a buffer chip on the module itself.
How do I install the 1Rx8 registered module and what step is often missed?
Power down, open the chassis, align the notch with the key in the 288-pin slot, press firmly until the ejector tabs click, then verify in BIOS that ECC and registered mode are enabled.
More in ECC Server RAM
Similar items
Axiom AX31600R11A/8G 8GB DDR3 1600 ECC Registered server RAM
- 8 GB
- DDR3 1600
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
A-Tech 8GB DDR4 2666 ECC REG RDIMM 1Rx8 288-Pin Server RAM
- 8 GB
- DDR4 2666
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
A-Tech 16GB DDR4 2133 ECC RDIMM 2Rx4 Server RAM 7082850
- 16 GB
- DDR4 2133





