Crucial CP16G60C36U5B 16GB DDR5 6000 desktop RAM
- 16 GB
- DDR5 6000
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
8GB DDR4 desktop memory running at 3200MHz with CL22 latency and 1.2V operation
This A-Tech module delivers 8 GB of DDR4 memory at 3200 MHz with CL22 latency and 1.20 V operation. It uses a 288-pin unbuffered DIMM form factor built with major-brand chips. The stick is validated as a direct replacement for Kingston KVR32N22S6/8 and KCP432NS6/8 parts.
Builders upgrading a mainstream desktop that accepts non-ECC UDIMM memory can use this module. Systems that require ECC, registered DIMMs, or a different voltage should select a different part. The single-rank 1Rx16 organisation works with most consumer AMD and Intel platforms that support DDR4 3200.
The tested speed of 3200 MHz (PC4-25600) with CAS latency 22 at the standard 1.20 V determines whether this module matches the motherboard's supported profile. If the board only runs lower frequencies or tighter timings, the memory will down-clock accordingly.
Measured against everything we stock in Desktop RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR4 3200 (PC4 25600) |
| Processor | |
| Chipset | Major Brand Chips |
| Memory | |
| CAS latency | CL22 |
| Tested speed | 3200 |
| ECC support | No |
| Buffer type | Unbuffered |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Recommended for | AMD & Intel Compatible |
Yes, the stick is a JEDEC-standard DDR4 3200 module rated at CL22 1.20 V, so it will not exceed the 3200 MT/s data rate unless the motherboard manually raises frequency or tightens timings.
The module uses the regular 288-pin UDIMM form factor and a low-profile green PCB, so it fits any desktop DDR4 slot that is not blocked by an oversized CPU cooler.
Align the off-centre notch on the gold edge with the key in the slot, press straight down until both retention clips click, and verify the clips fully lock — partial seating is the most common cause of a no-post boot.
More in Desktop RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?